Dual Motherboard Stand for CPU Crypto Mining | Lite & Full Versions + 12x Screws

Features and further details This is a custom made Dual Motherboard Stand Mount. Details: It is a clean black plastic design that is minimalistic. Designed to have a perfectly fit two motherboards on either side with a standard PC power supply in the middle. Whether ATX or Micro ATX; this stand will support these form factors. Please note that one side (left side/PSU side) motherboard sits upside down while the right side (SSD side) is upright.  Please look at photos to determine if your motherboards will support this design.  Lite Size Stand supports= ATX /\ ATX or MATX /\ ATX  Note- it only supports 1 MATX but does support 2 ATX motherboards. Standard Size Stand supports= ATX /\ ATX or ATX /\ MATX AND MATX /\ MATX or MATX /\ ATX     Note- it supports both 2 MATX and 2 ATX. If you have 2 ATX boards, get the lite version. If you have 1 MATX and 1 ATX still get the lite version. But if you have 2 MATX get the standard version.  The stand features dual SSD mounts that are friction fit. The left side has a ATX PSU mount with 4 screws holes. The motherboard stand can be mounted with 6/32 hex screw or M3 screws. Please don't over tighten as it is plastic and its easy to over thread the screw holes. Both stands support full size ATX power supplies. Please note that you will need a 24 Pin splitter to run both motherboards from 1 PSU. Your PSU should have at least 2x 8 Pin (4+4) CPU power cables. The standard length for those CPU power cables will allow them to work on the dual stands without needing a extension. Please be mindful of power draw for the PSU. You do not want to go over rating of your PSU otherwise it might stop working or worse, cause serious damage. I am NOT responsible for any damages that may occur.  Package Includes: Dual Motherboard Stand and 12x 6/32 PC Screws. NO hardware is included except the Stands themselves Manufactured by 3D Print Master LLC ALL RIGHTS RESERVED