Single Flexion extruder retrofit kit for dual extruder printer

Single Flexion extruder retrofit kit for dual extruder printer Flexible filament extruder retrofit kit for dual-extruder direct-drive machines, such as Flashforge Creator, Monoprice Dual, or Powerspec Ultra. The Flexion extruder will allow full-speed printing of ultra-flexible filaments. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE, ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA. This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. *Not compatible with stock QiDi or Makerbot extruders – for dual extrusion on these printers, you will need the complete dual kit. Weight .25 lbs Dimensions 3 x 4 x 1 in Works with Flashforge Creator, Monoprice Dual, Wanhao 4S, Powerspec Ultra, and many others (see support pages) Includes Mounting blockTensioning arm with idler and cleaning brushAdjustment camCustom drive gearFeed barrelHeater blockInsulation for heater block4 nozzles – 0.2, 0.3, 0.4, 0.5 mm orificeAdapter shim to allow 6mm and 0.25″ heater cartridges3 PTFE feed tubesSpare cleaning brushAll mounting hardware6mm and 7mm wrench for installing nozzles“Flexion inside” quick-guide sticker Note: does not include stepper motor or motor mounting screws