MakerBot METHOD X ABS-R Filament
MakerBot METHOD X ABS-R Filament ABS WITH SUPERIOR PRINTING RELIABILITY, PERFORMANCE, AND EASE OF USE. ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts. Works with RapidRinse™ Fast Dissolving Support SPOOL TYPESmart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay. DIMENSIONS AND WEIGHTSpool Diameter: 21.8 cm (8.6 in)Spool Width: 4.2 cm (1.65 in)Material Diameter: 1.75 mmShipping Weight: 1.1 kg (2.4 lb)Net Weight: 0.65 kg (1.43 lb) STORAGE ENVIRONMENTStore in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from the air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process. MATERIAL PROPERTIES Properties Test ABS-R Tensile Strength (MPa) ASTM D648 41 Tensile Modulus (MPa) ASTM D648 2400 Strain at Yield (%) ASTM D648 2.3 Strain at Break (%) ASTM D648 33.4 Flexural Strength (MPa) ASTM D790 79 Flexural Modulus (MPa) ASTM D790 2600 Izod Notched Impact Strength (J/m) ASTM D256 129 – C/H Izod Unotched Impact Strength (J/m) ASTM D256 970 - C Heat Deflection Temperature – 64 psi (C) ASTM 648 105 Heat Deflection Temperature – 264 psi (C) ASTM 648 102 PRINTER COMPATIBILITY METHOD X 3D Printer METHOD X Carbon Fiber 3D Printer* EXTRUDER COMPATIBILITY Model 1XA Extruder LABS GEN 2 Experimental Extruder SUPPORT MATERIAL COMPATIBILITY MakerBot RapidRinse Fast Dissolving Support Material *Requires purchase of compatible extruder SPECIFICATION DIMENSIONS AND WEIGHTSpool Diameter: 21.8 cm (8.6 in)Spool Width: 4.2 cm (1.65 in)Material Diameter: 1.75 mmShipping Weight: 1.1 kg (2.4 lb)Net Weight: 0.65 kg (1.43 lb) STORAGE ENVIRONMENTStore in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from the air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.