Adafruit NeoPixel Digital RGB LED Strip - White 60 LED 1m

Key Features: Control each LED individually 1 meter length - 60 LEDs per meter Set the color of each LED's red, green and blue component with 8-bit PWM precision Flexible PCB material with a weatherproof sheathing You thought it couldn't get better than the world-famous 32-LED-per-meter Digital LED strip! You wanted twice the LEDs? We got it (well, its 1.875 times as many but that's within a margin of error). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted less noticeable strip color - this strip has white-colored flex PCB, which will be less visible against white-painted walls. This is the strip with white flex PCB, its identical to the black 60 LED/meter except it has a different color mask on the flex strip.There are 60 RGB LEDs per meter. Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.Item SpecificsSize: 12.5mm (0.5") wide, 4mm (0.16") thick with casing, 16.7mm (0.65") long per segmentWeight (w/ silicone jacket and 6" leads): 39gRemovable IP65 weatherproof casingMaximum 5V @ 60mA draw per 0.65" strip segment (all LEDs on full brightness)5VDC power requirement (do not exceed 6VDC) - no polarity protection1 integrated RGB LEDs per segment, individually controllableLED wavelengths: 630nm/530nm/475nmConnector: 2-pin JST SM (may not come on strip)May ship with either WS2812B or SK6812-based LEDs