Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

Key Features: Works with any K, J, N, R, S, T, E, or B type thermocouple -210°C to +1800°C output in 0.0078125° resolution - note that many thermocouples have about ±2°C to ±6°C accuracy or worse depending on the temperature and type Internal temperature reading 3.3 to 5v power supply and logic level compliant SPI data requires any 4 digital I/O pins Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long time we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. Now we're happy to offer a great new thermocouple amplifier/converter that can handle just about any type of thermocouple, and even has the ability to give you notification when the temperature goes out of range, or a fault occurs. Very fancy!This converter communicates over 4-wire SPI and can interface with any K, J, N, R, S, T, E, or B type thermocouple.This breakout does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). We even added inline resistors and a filter capacitor on-board for better stability, as recommended by Maxim. Goes great with our 1m K-type thermocouple or any other thermocouple, really!Item Specifics1 - Fully assembled and tested breakout1 - 2-pin terminal block (Blue or Black)1 - pin headerSize: 25.0mm x 22.0mm x 3.0mm / 1.0" x 0.9" x 0.1" Weight: 3.5g / 0.1ozThermocouple not included