Bondtech LGX Lite Extrude with Motor (EXT-LGX-LITE)
Key Features Larger drive wheels, for increased filament grip Filament pre-tension lever, for repeated results Drive wheels’ maintenance windows, for easy cleaning Compact, light & centered filament path, for increased performance and compatibility Multiple mounting hole patterns, for easy and flexible setup The LGX Lite eXtruder is the second Bondtech extruder to present a pre-tension mechanism that includes an easy to use lever for users to release the tension or define it as one of 2 different settings. This extruder only supports 1.75 mm size filament.The LGX® Lite features 4 mounting patterns: 4 holes at the bottom; 2 holes at the right hand side; 1 hole at the top plus the filament entry that may be used as anchor; and 2 holes across, to hold the stepper motor.The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance.Item Specifics1x LGX® Lite feeder1x LDO Nema14 Round 20mm pancake stepper motor; 1m long lead cable with JST-XH 4-pin connector1x 2mm Hex Key (recommended tool)1x Powered By Bondtech sticker.1x Push-fit collar1x 30mm PTFE tube to use in the PTFE Tube Adapter.8x M3 square nuts for reinforcing mounting holes.e-steps value : 562 using 16 microsteps; 1124 using 32 microsteps.Drive wheels : hardened steelMaterials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.Mounting holes : M3Mounting patterns : bottom (4 points); right (2 points), front to motor (2 points), top (1 point)Hole at the top of the LGX® Lite : 5 mm depthHoles on the side of the LGX® Lite : 5 mm depthHoles on the bottom of the LGX® Lite : 5 mm depthMax tightening torque on the extruder screws is 0.3 NmMotor gear : 10 teethMotor length: 20 mmMotor Diameter: 36mmMotor Max Current : 1.0 A / phaseMotor Step Angle : 1.8 degreeMotor Max Torque at : 1800 PPSMotor Potential Flow Rate @ Max Torque : 120mm^3/sMotor Class: H, rated peak temp 180?Motor Max operating Temperature / Current : 120? / 750 mAMotor Manufacturer SKU : LDO-36STH20-1004AHG(XH)Note: Compatible with Nema14 round stepper motors**Use the LGX Lite only with a Ø36mm round stepper motor featuring a 10 teeth motor gear.