Flexion Retrofit Kit for Dual Extruder (Right Side Only)

Key Features: Extruder retrofit kit for dual-extruder direct-drive machines Right side only Print fast with flexible materials, higher resolution, and fewer failures Kit requires extruder disassembly to install upgrade 3D printer extruder retrofit kit for dual-extruder direct-drive machines, such as the Flashforge Creator Pro, QiDi Tech, Powerspec Ultra, and CTC Dual Extruder. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works well with flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA. Item SpecificsWeight : 0.1 lbsSize: 3.5 x 4.5 x 1.25 inWorks with: Flashforge Creator, Monoprice Dual, Dremel, Wanhao 4S, Powerspec Ultra, CTC Dual Extruder, and many othersQiDi and CTC stock extruders are NOT compatibleQiDi temperature sensor location is moved and will read 10-15° low, so turn your print temperatures down.Detailed instructions on disassembly and installation can be found on the Diabase Engineering site. IncludesMounting block2 - Tensioning arm with idler and cleaning brush (one right & one left)2 - Adjustment cam2 - Drive gear2 - Feed barrel2 - Heater block2 - Insulation for heater block6 nozzles – 2 each 0.3, 0.4, 0.5 mm orifice2 - Adapter shim to allow 6mm and 0.25″ heater cartridges4 - PTFE feed tubes2 - spare cleaning brushesAll mounting hardware6mm and 7mm wrench for installing nozzlesStepper motor or motor mounting screws not included