52Pi M.2 HAT+ and Raspberry Pi Active Cooler for Raspberry Pi 5, Support M.2 SSD 2230/2242

[Description] This kit contains Raspberry Pi M.2 HAT+ and Raspberry Pi Active Cooler for Raspberry Pi 5. The Raspberry Pi M.2 HAT+ M Key enables you to connect M.2 peripherals such as NVMe drives and other PCIe accessories to Raspberry Pi 5’s PCIe interface. The M.2 HAT+ adapter board converts between the PCIe connector on Raspberry Pi 5 and a single M.2 M key edge connector. You can connect any device that uses the 2230 or 2242 form factors. The M.2 HAT+ can supply up to 3A of power. The M.2 HAT+ uses Raspberry Pi’s HAT+ specification, which allows Raspberry Pi OS to automatically detect the HAT+ and any connected devices. The included threaded spacers provide ample room to fit the Raspberry Pi Active Cooler beneath an M.2 HAT+. The M.2 HAT+ is only compatible with the Raspberry Pi Case for Raspberry Pi 5 if you remove the lid and the included fan. The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads. [Features] About the Raspberry Pi M.2 HAT+ M KeySingle-lane PCIe 2.0 interface (500 MB/s peak transfer rate)Supports devices that use the M.2 M key edge connectorSupports devices with the 2230 or 2242 form factorSupplies up to 3A to connected M.2 devicesPower and activity LEDsConforms to the Raspberry Pi HAT [Specifications] Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5Fan speed control: Pulse width modulation control with tachometerMaximum airflow: 1.09 CFMMaximum fan speed: 8000 RPM +/- 15%Product material: Anodised aluminium [Includes] 1 x ribbon cable4 x 16mm GPIO stacking header4 x threaded spacers8 x screws1 knurled double-flanged drive attachment screw to secure and support the M.2 peripheral [52Pi Wiki] KZ-0061 - 52Pi Wiki