Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel

⚡ Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel Upgrade your system with our high-performance Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel. Built for reliability, efficiency and seamless integration with modern setups. 📌 Key Benefits ✅ High-efficiency design for superior performance ✅ Optimized heat dissipation and durability ✅ Plug-and-play compatibility for easy integration ✅ Ideal for industrial and residential use 📄 Technical Specifications SPECIFICATIONS: Is_customized: Yes Model Number: RX-600MPPT-MS Application: Charger Controller Description: Super-intelligent wind-solar hybrid controller is a cost-effective control device optimized by our company on the basis of super intelligent controller. It inherits most of the practical functions (such as speed control, limit protection of over-current, over-voltage etc.) and reduces the scalability, so it has a very high cost-performance ratio. It’s suitable for mass and low cost use. Three-protected circuit board, and waterproof jacket, both protect the device from damage due to taking in water slightly. Standard configuration of mini port TTL232 communication, it is easy to do the monitoring with the computer software. (RS485, short-range wireless is optional). Using a USB to RS232 members, more convenient to exchange data with a computer (computer with USB interface can be used). Photovoltaic panels will not be damaged with continuous reverse connection at the input port; it can work normally after correction. ican provide automatically tracking mode of wind turbine maximum input power, or the mode of 5 segments match curve input configuration (input rev to input current; or input voltage to input current curve), which makes the high efficient generation of the wind turbine, but with low speed. It provides selection of multiple output modes (light control, time control, dawn mode, reverse direction), which can satisfy a variety of applications. The controller screen displays not only the current, voltage, power of conventional wind turbine, PV, battery, and the output port; but also the cumulative generating capacity of wind turbine and PV, the remaining battery power, wind turbine speed. Technical data: Battery parameters Applicable battery voltage 24V 48V Battery protect method Reverse connection protection ( Blow Fuse); over voltage protection, under voltage protection (for street light and such kind of load) Voltage at the over voltage protection point 29.0V±0.2V 58.0V±0.2V Voltage at the over voltage recovery point 27.5V±0.2V 55.0V±0.2V Voltage at the under voltage protection point 21.0V±0.2V 42.0V±0.2V Voltage at the under voltage recovery point 23.0V±0.2V 46.0V±0.2V Parameters of wind turbine input port Rated power of applied wind turbine 1000W Rated current of the port 20A dc (after rectification) 15A dc (after rectification) Max. input current of the port 25A dc (after rectification) 20A dc (after rectification) Default speed of the wind turbine generation with limited speed 500 Rpm (settable) Default current of the wind turbine generation with limited current 20A (settable) wind turbine protection method Over speed protection, over current protection, induction lightening protection Unloading method PWM stepless high-frequency soft unloading (built-in) MPPT function Boost MPPT model ( automatic tracking or 5 segments curve tracking) Input current of MPPT channel 5A (standard configuration) Parameters of PV input port Rated power of applied PV 300W/24V 600W/48V Charging voltage drop <0.2V PV protection method Reverse connection protection Unloading method Open circuit unloading Display mode 3 digitsl (LED) display Communication mode RS232 (5V electrical level) (standard configuration), RS485/Short-range wireless RF (optional configuration) Displayed parameters wind turbine input voltage/current/power/generated capacity/ speed/ unloading current PV input voltage/current/power/generated capacity Battery voltage/charging current/power/total charging capacity/ battery status information Operating mode 3M foil key operation (2 buttons) Working temperature / humidity range (environment) -40~+80℃/20~85%RH (non condensing) Protection grade IP41 Controller size ( Dump load size 158mm*113mm *60mm 400*1101*155mm Net weight 6.0KG Picture: Application: ❓ Frequently Asked Questions ❓ 1 - Do you provide installation services?❌ No, we do not. Please note that we do not provide personalized technical consulting or installation services, as customer needs vary greatly across different regions. 🌍 2 - Do you ship to my country?Yes, we deliver worldwide. Products are shipped from suppliers located in North America, Europe, and Asia, with delivery times between 5 to 15 business days. ⏳ 3 - What is the delivery time?Delivery time is 5 to 15 business days. 💳 4 - How can I pay?Payments accepted via Stripe: credit card, debit card, and Apple Pay — all directly on our website. 📄 5 - Where can I find technical information?All technical information is available on the product sales page. ❓ 6 - Can I request a quote or estimate?🚫 No quote is necessary. You can purchase all products directly through our website with transparent pricing. 🖼 Product Images