ESP32-CAM-MB WIFI ESP32 CAM Bluetooth Development Board with OV2640 Camera MICRO USB to Serial Port CH340G 4.75V-5.25V Nodemcu

SPECIFICATIONSBrand Name: pcbfunOrigin: Mainland ChinaCondition: NewType: Voltage RegulatorModel Number: ESP32-CAM-MBSupply Voltage: 4.75-5.25VDissipation Power: ESP32 CAMis_customized: YesOperating Temperature: -20 ~ 70Application: Home smartPackage: TQFPtype: CH340G USBtype 1: esp32 camtype 2: esp32 cameratype 3: nodemcutype 4: esp32 development boardtype 5: Bluetooth moduletype 6: ov2640type 7: esp camtype 8: esp32 ethernet       ESP32-CAM-MB WIFI ESP32 CAM Bluetooth Development Board with OV2640 Camera MICRO USB to Serial Port CH340G 4.75V-5.25V Nodemcu32MbitSPIFlash ESP32-CAM Product Features   Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development   Description:   The ESP32-CAM has a very competitive small form factor camera module that can operate independently as a minimum system with a footprint of only 27*40.5*4.5mm and a deep sleep current of up to 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.     2.4G antenna rod + IPX adapter cable antenna rod length 11CM/line length 20CM Description 100% Brand New and High Quality2.4G WIFI AntennaSMA connector 2.4GHz 2dBi Wireless WLAN Antenna AerialGain: 2dbiConnector:RP SMA Male (female pin) ConnectorColor:blackAntenna length :11cm   ESP32-CAM-MB ( NEW type 1)   Introduction The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleHK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.   Parameter   Use low-power dual-core 32-bit CPU, which can be used as an application processor.  The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS  Built-in 520 KB SRAM, external 8MB PSRAM  Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces  Support OV2640 and OV7670 cameras, built-in flash  Support picture WiFI upload  Support TF card  Support multiple sleep modes.  Embedded Lwip and FreeRTOS  Support STA/AP/STA+AP working mode  Support Smart Config/AirKiss one-click network configuration  Support secondary development   Application Scenario  Home smart device image transmission Wireless monitoring Smart agriculture QR wireless recognition Wireless positioning system signal And other IoT applications   Specifications   Working voltage 4.75-5.25VSPIFlash default 32MbitRAM internal 520KB + external 8MB PSRAMWi-Fi 802.11b/g/n/e/iBluetooth Bluetooth 4.2BR/EDR and BLE standardSupport interface (2Mbps) UART, SPI, I2C, PWMSupport TF card, maximum support 4GIO port 9Serial port rate default 115200bpsSpectrum range 2400 ~2483.5MHzAntenna form Onboard PCB antenna, gain 2dBiImage output format: JPEG (only OV2640 support), BMP, GRAYSCALEPackaging method DIP-16Transmit power 802.11b: 17±2dBm (@11Mbps)802.11g: 14±2dBm (@54Mbps)802.11n: 13±2dBm (@MCS7)Receiving sensitivity CCK, 1Mbps: -90dBmCCK, 11Mbps: -85dBm6Mbps(1/2BPSK): -88dBm54Mbps (3/464-QAM): -70dBmMCS7 (65Mbps, 72.2Mbps): -67dBmPower consumption Turn off the flash:180mA@5VTurn on the flash and adjust the brightness to the maximum:310mA@5VDeep-sleep: The lowest power consumption can reach6mA@5VModerm-sleep: the lowest can reach20mA@5VLight-sleep: the lowest can reach6.7mA@5VSecurity WPA/WPA2/WPA2-Enterprise/WPSWorking temperature -20 ℃~ 70 ℃Storage environment -40 ℃~ 125 ℃, <90%RHWeight 10g   ESP32-CAM-CH340 camera module ( NEW Type 2)   Feature:   Product name: ESP32-CAM-CH340 camera moduleProduct model: HW-818Working voltage: DC 5VProduct size: 27*48.5*4.5mm (excluding pin header)Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is packaged in DIP and can be used directly by plugging in the bottom plate.   Program Download 1. Download the software and set it up, select the program or burn the file2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cableMICRO USB port and computer USB port.3. To download the software, select the correct download port, and then download. When the program starts to download,FLASH button can be released Package Include : ( we send it to you as your choose )   1 x ESP32-CAM-MB WIFI ESP32 CAM Bluetooth Development Board with OV2640 Camera MICRO USB to Serial Port CH340G 4.75V-5.25V Nodemcu     Feedback from Customer