Rich Solar ANL Fuse Holder with 40A Fuse

Rich Solar ANL Fuse Holder with 40A Fuse This Rich Solar ANL Fuse Holder is designed to safely hold up to 40A fuses. It ensures circuit protection and efficiently regulates voltage, making it an ideal addition to your electrical system. The holder is made of durable ABS plastic and comes with a fuse. Features Protect the charge controller, wire, and battery from over-current.  Visible through the clear window to easily identify open status. Compatible with all the 20A,30A,40A,60A,100A ANL fuses. Gold/Nickel plated terminal contact for corrosion resistance. Ignition protected. Rich Solar RS-ANL40 ANL Fuse Holder with 40A Fuse Installation Disconnect Power: Ensure that the power source is turned off or disconnected to prevent any electrical accidents during the installation. Determine Fuse Location: Decide where to install the ANL fuse holder. It should be placed in a location accessible for inspection and maintenance. Prepare Wires: Cut the power cable to the desired length, ensuring it is long enough to reach both ends of the fuse holder. Use wire strippers to remove insulation from both ends of the cable. Crimp or Solder Connections: Attach ring terminals to each end of the power cable. You can either crimp them using a crimping tool or solder them for a more secure connection. Connect to Fuse Holder: Connect one ring terminal to each end of the ANL fuse holder. Follow the manufacturer's instructions for your specific model. Usually, there will be screws on the fuse holder for securing the connections. Secure the Fuse: Insert the 40A fuse into the ANL fuse holder. Ensure it is securely in place. Secure the Fuse Holder: Mount the fuse holder securely in place using screws or other provided mounting hardware. Make sure it is stable and won't move around. Connect to Power Source: Connect one end of the power cable with the ring terminal to the positive terminal of your power source (battery or other power supply). Use appropriate tools such as a wrench or pliers to secure the connection. Connect to Load: Connect the other end of the power cable to the load or device you are powering. Insulate Connections: Use heat shrink tubing or electrical tape to insulate and protect the exposed metal parts of the connections. This helps prevent short circuits and ensures a safe installation. Test the System: After the installation is complete, turn on the power source and check if the system is functioning correctly. Ensure there are no sparks, unusual noises, or other signs of trouble. Rich Solar ANL Fuse Holder with 40A Fuse RS-ANL40 Technical Specifications Current Rating:  20A,30A,40A,60A,100A Voltage Rating: 72V Interrupt Capacity: 240A (48V)