721-0139 - Actuators - 721 Series
shop.actusinc.com

721-0139 - Actuators - 721 Series

$950.11
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Actus

View Store

24VDC, 36" cable output, pivot mounting bracket, .07 inches per second, no feedback, 3 Position Relay system. DETAILED INFORMATION Standard 721 Series actuator, which runs on a 24V source, with an output speed of 0.07 an inch per second. Total stroke length is 3 inches, and this unit has a 36" Push Pull cable as its output. This system works via connecting Terminals to a Common Ground as seen in the Terminal block pin-out: Block 1: 12V + to motor (RED WIRE) Block 2: 12V - to motor (BLACK WIRE) Block 3: Ground Wire Block 4: 12V + VDC Block 5: Connect to Ground to retract actuator. Block 6: Connect to Ground to mid-stroke actuator. Block 7: Connect to Ground to extend actuator. !!! DO NOT CONNECT MORE THAN ONE OF THE 3 POSITION WIRES (TERMINALS 5, 6 , or 7) TO GROUND AT ONE TIME, AS IT MAY DAMAGE THE ACTUATOR. ALL GROUNDS MUST BE COMMON FOR ACTUATOR TO FUNCTION PROPERLY. !!! ADDITIONAL INFORMATION Operating voltage: 24VDC nominal Output force: 50-lbs Motor current (no load): 1 amp M

Show More Show Less