USEPA Method 7 Heated Sampling Line
Meets or exceeds the following methods/laws/requirements: Section 6.1.1 (Probe), US EPA Method 7 Product Description For use in Aer Sampling's US EPA Method 7 sampling train. This flexible Teflon® Heated Sampling Line replaces the rigid conventional probe, allowing for easier handling during your grab sampling procedure. The front-end (head) of this flexible probe is inserted into the sampling porthole of the smoke-stack/chimney while the back end (tail) of this flexible probe is secured with the probe clamp at the impinger box. This product connects to the following (non-exhaustive) list of products from Aer Sampling: PN-1236 --- Probe Clamp Assembly for Heated Sampling Line K-160 --- USEPA Method 7 Flask Kit Other Applicable Documents:N.A. Product Specifications Outer Diameter of Heated Sampling Line (flexible probe): Outer Diameter (OD) English (inch) Metric (mm) Teflon® tubing Only 1/4 6.35 Teflon® tubing With the heater and insulation tubing ~1.18 -1.57 ~30 - 40 Connections:Head (Upstream/Facing the stack): Plain endTail (Downstream/Away from the stack):Plain end with Type K thermocouple plug (x1) and IEC C14 plug (x1) Material and Temperature: Material Maximum Heating Temperature Recommended Maximum Working Temperature Teflon® PFA 230 ºF (110 ºC) - Product dimension (Length): Teflon tubing Insulation tubing (braided black foam) 8 ft (~2.44 m) 6 ft (~1.83 m) Weight (Gravitational): lbs / kg Packing dimensions (Length x Width x Height): 8 ftEnglish (ft): Metric (m): Other Information All our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details. ----- Information presented here is subjected to Aer Sampling Group's terms and conditions.In case of discrepancy between English version and the non-English version, the English version shall prevail.Doc ID: AERHQWW-pn-1234-enLast revised (Excluding prices): 0; 01.05.21Obsolete Catalog ID: -