2022+ Subaru WRX Rear Bumper Diffuser Pin-stripe Pre-cut Overlay

Designed for the 2022+ Subaru WRX, this pin-stripe rear bumper diffuser overlay provides a captivating look and enhanced uniqueness to the back of your vehicle. Installing the overlay is quick and straightforward, allowing you to swiftly customize the aesthetic of your car. Enjoy an aggressive yet factory-quality touch on the rear end of your car. 2022-2024 Subaru WRX Rear Diffuser Pinstripes Fitment : [ 2022-2024 Subaru WRX] Rear Diffuser Fangs (Comes in 4 pieces) High-Quality durable material. 5-year durability  Easy to apply and install. Perfect fitment guaranteed. Available in many colors. How to Install For Best Results Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee (Professional Installation may be recommended, but not required ) Rinse / Soap / Alcohol Spray the rear diffuser Comes in 4 pieces, Align the top of the pin stripe just above the end of the diffuser that wraps towards the top Once that portion is stuck you can then lay the rest down with your other hand guiding placement. NOTE* Depending on placement, it will wrap under the diffuser fangs. PICTURE shows, diffuser pin will wrap underneath the diffuser fangs. Use your finger to swipe out the bubbles. Make sure to use a heat gun or blow dryer to heat up the overlay for ease of laying.  If it gets a bit hard to lay, use added heat to make the overlay malleable so it can shrink and lay onto the fang with ease A padded card is not required, the use of a finger will work perfectly. As it will allow you to move the stripe the way you want it. If using your fingers, start from one side of the stripe and use your finger to lay it down as you pull with your other hand to guide the way how the stripe will be placed onto fang of the diffuser If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles. ALWAYS POST-HEAT (Hot to touch but not scalding hot) the overlay after laying it down to ensure the glue behind is activated, this allows for more tackiness which will increase the longevity of the product from lifting or peeling.