AFD Overlays Steering Wheel Emblem Pre-Cut Overlay compatible with 2025+ Camry

AFD Overlays Steering Wheel Emblem Pre-Cut Overlay compatible with 2025+ Camry Revamp your Camry with our AFD Overlays Steering Wheel Emblem Pre-Cut Overlay made for Camry 2025+! Ditch the basic silver and embrace a customized look in your chosen color. Elevate your vehicle to reflect your individual flair with ease! Specs: Fitment: For 2025+ Camry Steering Wheel Logo Overlay High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability) Offered in many colors Easy Application, Peel and Stick. Comes in Pair (Steering Wheel Logo Overlay) Steering Wheel Logo overlay featured in Picture is GLOSS BLACK How to Install For Best Results Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee Rinse / Soap your Steering Wheel Emblem to get rid of debris before application Peel off the Logo. Each Logo is made slightly larger so it will wrap around the edges of the emblem. Align the emblem to where you would like the logo to line up, lay the flat pieces onto the flat portion of the emblem and smooth it out prior to removing the transfer tape. Make sure the flat surfaces of the emblem are covered with extra 'slack' (meaning extra vinyl over each edge and inner edge). Once laid you can use your finger to push down the excess and wrap it over the edges. It is best to heat up the overlay so the edges that are not fully adhered yet become more flexible due to the heat. Make sure you have a padded card or soft glove to put on your fingers, because once you lay it on the logo you would need to squeegee it on or use your fingers to push it into the crevices around and inside the logo emblem. Swipe left and right gradually to reduce bubbles If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge If you mess up, you can peel it off right away, but slowly, then add some heat to get rid of the wrinkles. For the Best application, use water underneath and squeegee out the water once the desired placement is met. (This Method only works if the backing has Oracle on it, But for a smaller emblem it may not be needed)