Headlight Day Time Running Light DRL Tint for 2024+ Elantra and Elantra N

Headlight DRL Tints compatible for 2024+ Elantra and Elantra N Headlight Day Time Running Light Add some serious style to your Elantra and Elantra N 2024+ with AFD Overlays Headlight DRL Tint! Personalize the color of your daytime running lights and give your car an aggressive and menacing look on the streets. Heads will turn and rearview mirror onlookers will shake in their seats. (Note: may cause neck strain from double takes.) Specifications: Fitment : [ for 2024+ Elantra ] Front of Headlight compatible for 2024+ Elantra, 2024+ Elantra N-Line, and 2024+ Elantra N High-Quality durable material. 5-year durability  Ultra-gloss nano-air tint Smoke Comes in pairs ( Passenger side and Driver side Headlight ) Easy to apply and install. Perfect fitment guaranteed. Available in JDM Yellow, Blue Smoke, Cherry Red How to Install For Best Results Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee Rinse / Soap the entire headlight to get rid of any debris or dust. Align the corner of the DRL tint at the pointed edge (edge that points into the fender) that is closest to the fender. The overlay will follow the curve of the headlight UNTIL the end. As you lay down the tint, adjust with your free hand that guides the rest of the overlay onto the DRL. Lift and adjust until the inside tint sits right at or slightly above the top of the DRL White led bar. A padded card is not required, however, it would be best to use one, since the DRL tint is a larger piece. Make sure you turn on the DRL to see that the black portion of the TINT covers all the lighting that shines through the headlight. Once the desired placement has been met use a blow dryer or heat gun to activate the glue, this method will also help to get rid of any tiny bubbles and improve adhesion If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles. After fully laying the overlay, heat up the overlay to ensure tackiness and adhesion. Peel off the transfer tape layer once done. There may be some residue left over by the transfer tape, to get rid of the residue use a goo-off product as this will rid the glue almost instantaneously.