Steering Wheel Bottom Logo Pre-cut Overlay compatible with 2022+ WRX
Steering Wheel Bottom Logo Pre-cut Overlay compatible with 2022+ WRX Enhance the appearance of your 2022+ WRX steering wheel with this carefully crafted overlay designed for the bottom portion of the steering wheel emblem. Available in a variety of colors, this overlay will give your WRX logo the attention it deserves, making it stand out as intended from the factory. Elevate your driving experience with this stunning addition to your steering wheel. 2022 2023 2024 Steering Wheel WRX Logo Emblem Overlay Specifications: Fitment : [ Compatible with 2022 - 2024 Subaru WRX] 2 x One Piece Steering wheel emblem bottom WRX Overlay (1 for extra practice) Overlay Piece that goes over the OEM Black Logo High-Quality durable material. 5-year durability Easy to apply and install (comes with transfer tape for a quick install). Perfect fitment guaranteed. How to Install: For Best Results Tools: Heat Gun or Blow Dyer Wipe down your emblem with soap/water or provided alcohol wipes. To get rid of any dust or debris use a condensed air duster to blow away the debris. Peel off the WRX logo from it's backing and make sure it is stuck onto the TRANSFER TAPE. Hold the transfer tape above the WRX Logo and align the W first to the topmost and leftmost side of the W. Once aligned the rest will fall in place and make sure you press FIRMLY on the application to ensure it has enough adhesion to the black WRX logo. Peel off the transfer tape slowly as the WRX overlay may peel off as you take off the transfer tape. If it does, lay the WRX back down and use your finger to rub the portion that keeps lifting till it sticks, or use a box cutter to hold down the overlay OFF the transfer tape backing and slowly peel off the transfer tape. Once peeled off, use your finger and press again firmly onto the overlay. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion Heat the overlay about 1 to 2 inches away and make sure the overlay gets a little warm but not scalding hot. This heat will ensure the glue is activated and will stick to the emblem for a long time. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge