#35 500W 24V electric motor kit w Base Reverse Control+Thmb Throttle+Key Go-Kart

img{max-width:100%; height:auto;} ZY1020 500 Watt 24 Volt DC MOTOR With bottom mount + 500 Watt 24 Volt SPEED CONTROLLER WITH Reverse Function + Thumb Throttle + Key Lock Switch (use for reverse function or to turn on/off controller) + Extra sprocket size 35 included Brand new with warranty. Motor comes with a #25 sprocket but we add a extra #35 sprocket in the box. Buyer must change the sprocket. To change it, hold tight the sprocket with a Vicegrip and turn the nut as if you wanted to tighten it. The Nut is reverse throttle, so if turned clockwise, it will get loose - ZY1020 motor (compatible with MY1020) for electric scooter, control box and throttle can be used for mini bike quad and Go-Kart. It may also work for bicycle. Or do it yourself enthusiasts. Wiring diagrams available at request when shipping. Motor Specs: - 24V DC - Max 500 Watt, 26.7 amps - Max 2500 RPM - Chain drive (11 teeth sprocket) #25 (1/4" pitch) + #35 (3/8" Pitch) Sprockets- Type of motor: DC, Brush - Reversible. Controller provides this functionality. - 12 gauge leads - Permanent Magnet Dimensions:    - Diameter: 4 1/4"    - Length (no shaft): 5 1/4"    - Length (with shaft): 6 1/4" This motor should work in some Xtreme or Razor electric scooter, mini bike or go-kart using 500 W motors that looks similar to this one. Should also work with any other brand with similar specs in motor.... Please check connector type and motor size and specs. before buying as replacement. Please ask us if you need to know any specific dimensions for this motor so you can be sure it will work for you. ___________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________ Control box (speed controller) specs: Dimension: aprox 3.25" x 2.5" x 1.5" Weight: 9 OZ Brand: Yiyun Model: YK31 This speed controller features connection terminals for:  - Battery - Motor - Charger - Lock / on-off switch - Connect to throttle's switch or to any switch to turn on the controller - Reverse Switch - Connect to throttle switch or any switch. When switch is activated, motor will reverse direction. - Brake (will shut off motor) - Battery charge indicator - Tail lamp - Throttle Throttle Specifications INCLUDED: 1 Throttle, 2 extra grip. Thumb Electric Scooter Bike Throttle Grip 5 Wire   Specifications: - Brand new - Electric Bike scooter Thumb throttle accelerator - Compatible with our controller. - Fits standard 7/8 inches (22.2mm)  handle bars - Cable length is approximately 30 inches - Includes 3 parts: Throttle and 2 extra grips - Wiring instructions: Throttle Controller Description Red connects to Red Voltage 5 to 0 Volts Black connects to Black or Yellow Ground White connects to Green, Blue or White Speed Adjusting Signal (0 to 5 Volts) ___________________________________________________________________________________________________________________ Charger Specs: - 120V / 240 AC to 24V DC for 24V SLA or 2x12V SLA batteries - 1.8 amps - 50 or 60 Hz _____________________________________________________________________________ _____________________________________________________________________________ We also sell other electric scooter parts and mini Bikes  Most orders ship same day from our warehouse  Warranty: 12 Months from purchase date. We will only replace motors that do not work out of the box.  We test all motors before shipping. We will not replace burnt out motors.