3Shul VESC Motor Controller C350 V3 *Discontinued

Replaced by the New V4 (built in Bluetooth and other updates to hardware/firmware)Optional Wiring harness available If you do not opt for the harness this VESC does come with a Molex connector and 24 pins to make your own harness.   Does not include battery or motor connectors. Please let us know if you need to purchase any XT90, QS8, or any motor connectors. Comes with Molex Mini Plug and 24 crimps on Molex ConnectorsFeatures: Field Weakening and MTPA (Maximum Torque Per Amp) are supported IMU for self-balancing applications (Onewheel, EUC, Robotics) Plenty of CPU resources are left so you can make your apps for the controller Powered By STM32F4 microcontroller Running at 168MHZ Sensored and sensor-less FOC with auto-detection of all motor parameters Current and voltage measurement on all phases Variable Regenerative braking Brushless, brushed DC motors, IPM motors are supported A GUI that is easy on the eyes Adaptive PWM frequency to get as good ADC measurements as possible Good start-up torque in the sensor-less mode The motor is used as a tachometer, which is good for odometry Duty-cycle Control, Speed Control, Current Control and Position Control Seamless 4-quadrant operation Interface to control the motor: PPM signal (RC servo), analog, UART, I2C, USB or CAN-bus Consumed and regenerated amp-hour and watt-hour counting Optional PPM signal output. Useful when e.g., controlling an RC car from a raspberry pi or an Android device The USB port uses the modem profile, so an Android device can be connected to the motor controller without rooting Adjustable protection against Low input voltage High input voltage High motor current High input current High regenerative braking current Rapid duty cycle changes (ramping) High RPM (separate limits for each direction). When the current limits are hit, a soft back-off strategy is used while the motor keeps running. If the current becomes way too high, the motor is switched off completely. The RPM limit also has a soft back-off strategy. Realtime Data logging and Monitoring. Specifications: Size: L 133mm * W 73mm * H 38mm Voltage: C350 (36-84 V (8-20S safe)) / CL350 (36-126 v (8-30s safe))  Current: Continuous max 200A Battery, 400A Phase (Values depend on the mounting and ambient temperature around the device!) Support BLDC square wave mode control and FOC sine wave mode. Firmware: latest (firmware update supported) ERPM:150000 Control Interface Ports: USB, CAN, UART, Bluetooth Supported Sensors:  ABI, HALL, AS5047, AS5048A, Sensor-less Input Set Support: PPM, ADC, NRF, UART Circular Bus Bar Size: 10mm (Diameter) Gyroscope and Accelerometer (BMI160) Programmable: Yes User Manuals, Firmware, Cad Files Click herePlease supply 5v to Bluetooth module input not 3.3 per manual You must register your 3shul within 7 days of receiving your unit.  First, create a user account here, then navigate to the warranty claim page if you have an issue.   3 Month Warranty on all 3shul products.  See our warranty page for more info. Download the newest version of VESC-TOOL: https://vesc-project.com/vesc_toolFor setup and resources:https://www.youtube.com/watch?v=cal_N2W6OsE&t=150shttps://www.youtube.com/results?search_query=vesc+setuphttps://vesc-project.com/forumhttps://discord.com/invite/JgvV5NwYtshttps://www.facebook.com/groups/electricskate/https://www.facebook.com/groups/671947930216764https://www.facebook.com/groups/1085801565773033Based on Vesc by VESC®-Project. VESC is a registered TM, owned by Benjamin Vedder"