Multi-Code 1-Channel 12-24V Gate Receiver | MUL-109950

Multi-Code 1-Channel 12-24V Gate Receiver | MUL-109950 The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. The whip antenna connects to the receiver’s Type-F antenna connector. Also included are 3 feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver. The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator. Includes 11-inch wire whip antenna 3 feet of coaxial cable  Bulkhead connector  Features Operates on 12-24 volts AC or DC power One channel Programmed with a 10-position coding switch Dual frequency receiver Compatibility The Model 109950 is compatible with Multi-Code and Stanley transmitters only. Technical Specifications Codes: 1,024 (set by dip switches) RF frequency: 300 MHz or 310 MHz (jumper selectable) Dimensions: 3.625″ W x 5.25″ H x 1.5″ D Product Literature Multi-Code 109950 Installation Manual Multi-Code 109950 Specs Sheet