Titanium 6-4 3D Printing Certified Reference Material

Titanium 6-4 Additive Manufacturing Powder (UNS R56400) Certified Reference Material (CRM) This Titanium 6-4 Powder (-53/+16um) certified reference material is an additive manufacturing titanium alloy widely used as a standard for calibrating and verifying your spectrometer (XRF, ICP-OES, Spark-OES, etc.). This material is precisely manufactured and certified to have traceable measurements and specified impurity levels, ensuring reliable results for laboratories performing calibration, quality control, and materials testing. Certified Titanium 6-4 Additive Manufacturing Powder Chemical Composition:  Element Composition Ti Balance Al 6.47% C 0.051% Fe 0.216% H 0.0018% Mn 0.011% N 0.04% O 0.15% S 0.0014% Sn 0.008% V 4.24% Typical Titanium 6-4 Additive Manufacturing Powder Chemical Range:  Element Composition Ti Balance Al 6% V 4% H 0.015% max N 0.02% max C 0.10% max Fe 0.25% max Others (each) 0.1% max Others (total) 0.4% max Approximate Particle Size: Test Units Result -75/+63 volume % 0 -63/+53 volume % 0.9 -53/+45 volume % 22.3 -45 volume % 76.9% Tap Density g/cc 2.9 Hall Flow sec 23.9 Apparent Density g/cc 2.5 Minimum sample size should be determined based on the analytical technique with sample of 0.1 grams or greater. Store material in a cool, dry place. Other Names: Titanium 6-4, Titanium 6-4 Powder, Ti 6-4 for 3D Printing, Titanium 6-4 for Additive Manufacturing, UNS R56400 Available material forms: Powder Reference Material (RM): A reference material, or RM, is a material with a known grade and/or chemical composition that is typically used for alloy or grade identification. Certified Reference Material (CRM): A certified reference material, or CRM, is a material that has been thoroughly analyzed and characterized using multiple validated methods to determine its chemical composition. The results of these analyses are then used to establish certified values, along with associated uncertainties. CRMs are produced and certified by accredited organizations or laboratories following internationally recognized standards, such as ISO Guide 34 (ISO 17034). Please Contact Us if you would like to know the specific dimensions of a sample.