Audio-Technica ATW-902A System 9 VHF Wireless Handheld Microphone System

Audio-Technica ATW-902A System 9 VHF Wireless Handheld Microphone System This system is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality.Designed for live sound reinforcement applications. The system consists of a wireless VHF receiver and a wireless VHF handheld microphone transmitter. The receiver utilizes two dipole antennas for extended range, and allows you to select your VHF transmission frequency from 169 to 172 MHz. The receiver includes LED indicator lights for channel, RF, and AF peak. The back of the receiver includes a volume control knob, a squelch control knob, a balanced XLR audio output, and an unbalanced 1/4" audio output. The receiver also includes a power cord hook to prevent accidental pull-out of the DC power supply. The handheld microphone transmitter is powered by two AA batteries and includes a battery status LED indicator, channel selection DIP switches, and a power/mute button. FEATURES • Balanced XLR and unbalanced output jacks enable use with a wide variety of audio gear• Advanced dipole antenna system for extended operating range• Easy operation and clear, natural sound quality• 4 selectable frequency-coordinated VHF channels• Reliable performance and durable construction   SPECIFICATIONS Overall System• Total Harmonic Distortion ~ <1% (at 1 kHz, +/-10 kHz deviation)• Operating Frequencies ~ VHF highband, 169 MHz to 172 MHz• Operating Temperature Range ~ 40° F to 110° F• Frequency Response ~ 80 Hz to 13 kHz• Operating Range ~ 60 m typical• Maximum Deviation ~ +/-10 kHz• Modulation Mode ~ FM Handheld Transmitter• Spurious Emissions ~ Following federal and national regulations• Accessories Included ~ AT8456a Quiet-Flex™ stand clamp• Battery Life ~ 8 hours (alkaline)• Dimensions ~ 251.8 x 53.5 mm• Battery Type ~ Two 1.5V AA• RF Power Output ~ 10 mW• Net Weight ~ 9.2 oz Body Pack• Spurious Emissions ~ Following federal and national regulations• Dimensions (W x H x D) ~ 70.2 x 103.7 x 24.9 mm• Input Connections ~ Four-pin Locking Connector    Pin 1: GND    Pin 2: INST INPUT    Pin 3: MIC INPUT    Pin 4: DC BIAS +9V• Battery Life ~ 8 hours (alkaline)• Battery Type ~ Two 1.5V AA• RF Power Output ~ 10 mW• Net Weight ~ 2.8 oz Receiver• Audio Output    Nominal Output Level   XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)   1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)• Receiving System ~ Non-diversity, single-channel, dual antenna system• Power Supply ~ 100-240V AC (50/60 Hz) to 12V DC .5A (center positive)• RF Sensitivity ~ 20 dBuV at 60 dB S/N ratio (50 ohms termination)• Dimensions (W x H x D) ~ 190.0 x 46.2 x 128.5 mm• Operating Temperature Range ~ 40° F to 110° F• Image Rejection ~ 50 dB minimum• Weight ~ 12.0 oz