George Taub Tru-Fit Thinner 32oz #03-4005

George Taub Tru-Fit Thinner 32oz  MPN: #03-4005 SKU: TAM36 MPN: #03-4004    SKU: TAM35 To provide adequate space for cement and common internal discrepancies for ALL crowns and inlays, four coats of fast-drying Tru-Fit will provide much better marginal fit by allowing castings to seat more completely. Tru-Fit also greatly reduces the need for occlusal adjusting. Instructions: 1. Shake well - Make sure all pigments have been shaken up. Tru-Fit must be as free flowing as water, add thinner as needed. 2. To create a 25micron space for cement, apply 4 thin coats of Tru-Fit with smooth, even strokes from a small brush to any die material. - Stone dies, amalgam, plated or epoxy. 3. Keep Tru-Fit 1/2 mm short of the margin. 4. Allow 30 seconds to one minute drying time between each applicatio. 5. Alternate colors of gold and silver to insure uniform thickness. 6. After Tru-Fit is applied, lubricate the die before applying wax.