JHEMCU GH F411 AIO GHF411AIO Flight Controller

Product introduction The board can handle 20A / 30A4 continuous current With 4 motor pluggable pins, not pre-welded by default, best for your self-assembly needs Compatible with 120X, 130X and 140X motors The USB port is installed on the side, you have more installation possibilities while still accessing the USB port All pads are on the edge of the flight controller, which is convenient for soldering Double-sided motor pads. Pin pads and wire pads are built-in for motor connection Integrated Betaflight MATEKF411 processor flight control, Betaflight OSD, F4 MCU and 20A / 30A ESC, support 2-4S battery Flight control parameters CPU: STM32F411CEU6 (100MHZ) Six axes: MPU6000 (SPI connection) Size: 32.5 * 32.5mm (25.5mm mounting hole) Firmware version: Betaflight MATEKF411 (MK41) OSD: Built-in BetaFlight OSD (OSD chip: AT7456E) Receiver: Support Frsky XM / XM + receiver / Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver Supports programmable LEDs such as WS2812 Built-in current sensor Weight: 6.3g ESC parameters Support BLheli / BLHELI_S Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input voltage: 2S-4S Lipo Continuous current: 20A / 30A (two models are optional) Firmware: BLHELI_S Motor connector: 1.25mm pin header Package included: 1 x Toothpick GHF411AIO 2-4S Brushless Flight Controller 2 x Power cord + (30A with XT60, 20A with XT30) 4 x Shockproof rubber shock absorbers 4 x Motor pluggable pin base