Genasun Energy-GV-5-65W 5A Solar charge controller w/ MPPT

                             Due to global supply chain constraints lead times for shipments may be delayed. We are actively working with our suppliers to mitigate shortages and improve lead times. If you have questions, please contact your AMRtechnologiesInc. representative at 1-800-213-0227 or submit your question AMRtechsolar@gmail.com Genasun Energy-GV-5-65W 5A | Solar charge controller with MPPT Small, critically efficient, and cost-effective, the GV-5 gets more from every panel. 5A 12V MPPT Controller w/ LVD 99.85% Peak Efficiency Electrolytic-Free, Ceramic Capacitors Doesn't wear out from heat High-Speed MPPT IP40 Advanced electronic protections 10 Year Warranty Compatible with lithium and lead-acid batteries For Lead-Acid Batteries GV-5-Pb-12V Maximum Recommended Panel Power 65W Rated Battery Current 5A Nominal Battery Voltage 12V Max Input Voltage 27V Recom. Max Panel Voc at STC 22V Minimum Battery Voltage for Operation 7.2V Trickle Charge to Recover Dead (OV) Battery Yes Input Voltage Range 0-27V Maximum Input Short Circuit Current 5A Continuous Rated Load Current 5A Maximum Input Current** 9A Charge Profile Multi-Stage with Temperature Compensation Absorption Voltage 14.2V Absorption Time 2 hours Float Voltage 13.8V Load (LVD) Disconnect/Reconnect Voltage 11.4/12.5V Battery Temperature Compensation -28mV/°C Operating Temperature -40°C - 85°C Maximum Full Power Ambient 50° Electrical Efficiency 96%-99.85% typical Tracking Efficiency 99+% typical MPPT Tracking Speed 15hz Operating Consumption 0.150mA(150uA) Night Consumption 0.125mA(125uA) Environmental Protection IP40, Conformal Coating, Nickel-Plated Brass & Stainless Hardware Connection 6-position terminal block for 12-30AWG wire Weight 2.8 oz., 80g Dimensions 4.3 x 2.2 x 0.9", 11 x 5.6 x 2.5 cm Warranty 10 years For Lithium Batteries GV-5-Li-10.7 GV-5-Li-12.5V GV-5-Li-14.2V GV-5-Li-16.7V Maximum Recommended Panel Power 50W 55W 65W 75W Rated Battery (Output) Current 5A (-SP model: 2A) Nominal Battery Voltage N/A Max Input Voltage 27V Recom. Max Panel Voc at STC 22V Minimum Battery Voltage for Operation 7.2V Trickle Charge to Recover Dead (OV) Battery Yes Input Voltage Range 0-27V Maximum Input Short Circuit Current 5A (-SP model:2A) Continuous Rated Load Current 5A Maximum Input Current 9A Charge Profile CC-CV Absorption Voltage - Absorption Time - Float Voltage 10.7V 12.5V 14.2V 16.7 Load (LVD) Disconnect/Reconnect Voltage 8.2/9.0V 9.3/10.5V 11.0/12.0V 12.4/14.0V Battery Temperature Compensation disabled Operating Temperature -40°C - 85°C Maximum Full Power Ambient 50° Electrical Efficiency 96%-99.85% typical Tracking Efficiency 99+% typical MPPT Tracking Speed 15hz Operating Consumption 0.150mA(150uA) Night Consumption 0.125mA(125uA) Environmental Protection IP40 (Terminals Nickel Plated) Connection 6-position terminal block for 12-30AWG wire Weight 2.8 oz., 80g Dimensions 4.3 x 2.2 x 0.9", 11 x 5.6 x 2.5 cm Warranty 10 years Mission-Critical Reliability Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller. Get the Ceramic Edge. Electrolytic-Free with 10 Year Warranty Genasun’s Ceramic controllers set a new benchmark for reliability. Traditional controllers have components filled with fluid electrolytes that boil off over time, causing system failure. Genasun Solid Ceramic controllers have no fluid. They don’t wear out in the heat. Backed by an industry leading 10 year warranty, these controllers take reliability to a new level. High-Speed MPPT: Always on Target Not all Maximum Power Point Tracking controllers were created equal. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That's okay for a clear day, but traditional controllers are constantly off target during changing cloud conditions – exactly when power is scarce and is needed the most. Genasun controllers adapt to changing light conditions 20 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can't keep up. Advanced Lithium Charging Algorithms Our Lithium charging algorithms draw from nine years of experience building Lithium battery packs for harsh environments. We've worked with every chemistry, and have tailored charge profiles to help you get more capacity and cycle life from your battery pack. Custom Voltages Available Genasun stocks the GV-4 in a variety of charge profiles for the most common Lithium chemistries and cell configurations. Custom voltages can be programmed at the factory to match the Float Voltage (CV voltage) of your battery. To order a Custom Voltage controller, hit the "Customize" button in the e-commerce page and select the custom voltage from the drop down. For further information email techsupport @ blueskyenergyinc.com. Surviving the Storm with Low Power Burn Every controller uses power. While a typical PWM controller burns 9mA, the Genasun GV-4 burns a scant 0.125mA. That slow burn is perfect for waiting out a snow-covered panel, or a few bad weeks of clouds. Partial Shade – In-City Applications Genasun controllers shine in partial shade. The 50% power increase from Genasun’s advanced MPPT is often enough to prevent system downtime from partial shade. From street signs and tree branches, to coffee cups and stickers placed on panels by pedestrians, Genasun MPPT keeps partially shaded solar panels generating more power than any other controller. Steady Power Source Life is unpredictable. PWM controllers amplify that unpredictability. A small amount of shade can drop PWM power output to 2/3's of what a Genasun MPPT controller can draw from the same panel. By constantly adapting to changing light conditions, Genasun’s advanced MPPT controllers provide a steadier source of power, keeping your system running in uncertain weather. Radio Silence Most MPPT solar charge controllers broadcast Radio Frequency noise from the DC/DC conversion circuit. Unfiltered inputs and outputs waste energy and interfere with nearby or attached electronics. Genasun worked to eliminated RF emissions from our line of charge controllers. During third-party testing for FCC compliance, the test engineer asked us, “Is it on?”. Mission accomplished. No Fans. No Relays. Fans get clogged with dust and dirt. Relays eventually stop switching. Genasun controllers use advanced electrical design that obsoletes these parts. With fewer moving parts to wear out, Genasun controllers outlast the competition. Fault Tolerance Electronic reverse-panel protection   This Product does not include Tax and shipping costs. International shipping is subject to regulations and Import Taxation of Country of destination. AMRtechnologies Inc. Solar & Electrical SystemsTel: (+506) 7037-8077 or Toll Free: 1(800) 2130227Solar Systems in United States & Latin America www.AMRtechsolar.com