Bambu Lab Hotend with 0.6 mm Nozzle - A1 Series
Quick Swap Nozzle Design The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend. *Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns. Highlights of Various Nozzle Diameters 0.2mm NozzleOptimal Print Fineness Extremely small layer gapsMore detailed on the vertical print surface 0.2mm NozzleOptimal Print Fineness Smaller diameter extrudes thin filamentsHigh resolution on the horizontal print surface 0.6mm and 0.8mm NozzleFaster Print Speed Larger diameter extrudes more filaments per second, resulting in faster print speed The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in Bambu Lab A1 Series 3D printers. Filament Compatibility Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required? General PLA YES YES YES YES Optional PLA Sparkle *NO YES YES YES Optional PLA Marble *NO YES YES YES Optional Wood/Rock/Metal-filled PLA *NO YES YES YES Optional PETG YES YES YES YES Optional PVA YES YES YES YES Optional ABS YES YES YES YES Optional ASA YES YES YES YES Optional PC YES YES YES YES Optional PA *NO YES YES YES Optional TPU *NO YES YES YES Optional Bambu PLA-CF *NO *HighlyRecommended YES YES *Required Bambu PETG-CF *NO *HighlyRecommended YES YES *Required [*Note] Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality. Learn more about filament compatibility on Bambu Lab Wiki. Installation Learn more about replacing the Hotend with Nozzle on Bambu Lab Wiki. In the Box 1. Hotend with 0.6 mm Nozzle * 1 Compatibility A1 Series Product Specifications Materials Metal Packaging Size 60*60*30 mm Color Black Packaging Weight 30 g