ESUN Resin PLA 3D resin with good toughness and comfortable to use 3d PLA resin printer resin
ESUN Resin PLA 3D resin Founded in 2002, Shenzhen eSUN Industrial Co., Ltd. is a national high-tech enterprise, a national strategic emerging industry new material project undertaker, and one of China's top ten biodegradable enterprises. Description Based on eSUN self-produced PLA polyol synthesised, with good toughness, low odor, and smooth surface of printed parts. EN71-3 toy standard certified, safer to use; can be drilled without cracking; low odor, more comfortable to use. Sellingpoint High toughness Low odor Notes Shake well before printing D PRINTING PHOTOPOLYMER RESIN Properties Table ( *Recommended Settings For Printer can be viewed by visiting “Download”) 3D PRINTING PHOTOPOLYMER RESIN eResin-PLA Viscosity(mPa·s) 100-270 Density(g/cm3) 1.07-1.10 Tensile Strength(MPa) 24-55 Elongation at Break(%) 24-37 Flexural Strength(MPa) 25-61 Impact Strength(J/m) 27-40 Tearing Strength(GPa) / Heat Distortion Temp(℃) / Hardness(Shore D) 75-82 Grades (out of 10) Strength（S） 6 Toughness（F） 7 Forming（P） 8 Accuracy（S） 7 Speed （A） 8 What is plant resin?Made from polylactic acid based biolactic acid, it is green and biodegradable, with low odor and irritation, and will not cause harm to people and the environment.The plant resin has better hardness, printing models are not prone to cracking, and good molding and impact resistance.Vegetable resin specification:Net weight: 500g and 1000g (two capacities)Material: resin monomer, photoinitiator, and polylactic acid11 available colors: yellow, white, beige, gray, transparent, black, orange, green, light blue, light green, and redTerms and Conditions:Shake well before use, wear gloves and masks to avoid dust and the environment.Preventive measures:This product cannot be taken orally. Stay away from the children. Do not enter the eyes. If accidental contact occurs, rinse with plenty of water as soon as possible. If not, seek medical attention immediately.Save Notes:It is recommended to store at a room temperature of 20 ℃ - 30 ℃. The lower the temperature, the higher the viscosity of the resin. Sealing, dust or moisture, affecting print quality. Store under the sun. The sun contains a large amount of ultraviolet rays, which will solidify the photosensitive resin.