Phrozen Aqua 8K Resin for LCD 3d printer phrozen mini 8k mega 8k

Phrozen Aqua 8K Resin Phrozen’s new Aqua-Gray 8K resin is designed to showcase 3D models in high resolution and works best with the Sonic Mini 8K 3D Printer. With its special formula, Aqua-Gray 8K creates high-quality & extremely intricate 3D models with 8K resolution. Phrozen Aqua 8K Resin Benefits 【Low Shrinkage & High Precision】Phrozen Aqua Resins are developed for low shrinkage and high precision printing. Their low warpage & dimensional stability are especially good for precise parts. 【Low Viscosity & Low Odor】Phrozen Aqua Resins are easy to print and are easily post-processed due to their low viscosity. Meanwhile, their low odor will not make your place smell.  【Wide Application】Printed parts are tough and resilient. Phrozen ABS-like Resins make them a perfect match not only for painted models but also for industrial applications. Phrozen Aqua 8K Resin Specs Weight: 1kg per bottle Density: 1.1 g/cm3 Viscosity: 280-380 cps Surface Hardness: 85 Shore D  UTS: 47 MPa Tensile modulus: 2256 MPa Elongation at Break, EAB: 23 % Flexural strength: 54 MPa Flexural modulus: 1551 MPa Izod notched impact strength: 9.63 J/m HDT @0.45MPa: 77 ℃   Tips: XY resolution：0.050 mm Shake well before use. Check your recommended resin profiles parameters according to your 3D printer. Click here to find your resin profile. We recommend washing your prints with 95% IPA and drying it with an air gun. Note: Please don’t soak your prints in 95% IPA for over 30 seconds at a time. Precautions Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.  After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin. Keep resin away from kids and away from direct sunlight exposure. Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water. DO NOT dump resin. Please cure it and treat it as general plastic garbage.