Antra® DP6, Extended Shade Range 3/5-8/9-14, Auto Darkening Welding Helmet

Antra® Digital Pro Series DP6 welding helmet is featured with the smart chip controlled 4 sensor auto darkening lens, which is extremely fast responsive to electric arc from TIG, MIG, MMA or Plasma applications. The big viewing area 3.86X2.50” ADF with digital controlled provides much better precise shades and better vision of the whole welding process, which ensures a better finish of welding or cutting. This light weight welding helmet is so versatile that it can be used on grinding, cutting and welding applications. Features: UV/IR Permanent Protection by Passive Filter, Shade 14  Engineered for TIG, MIG/MAG, MMA(Stick), Plasma Cutting and Grinding. 2 top sensors and 2 bottom sensors design ensure higher sensitivity with highest sensor exposure Super sensitive to welding arc, less responsive to sunlight or workshop lights Very low DC TIG amperage, stable TIG performance (as low as 2Amps） Quick Switch button from outside to toggle between Grinding and Weld/Cut mode, without taking off the shield. Each activation of Grinding mode is for 30 minutes only, to avoid accident flash. Previous setting Memorized until reset settings or power outage (Grinding Mode is by activation only, not memorized) Solar power cell + Lithium Battery (replaceable) Dual Power with easy access battery compartment. Fully automatic power ON/OFF Cheater lens compatible Hard hat adapter (optional) Low battery indicator Power off delay 10 minutes, the filter keeps alive for 10 minutes in dark environment before it goes to sleep. Very light design, only 457g 2 Year manufacturer warranty Specifications:  Viewing Area: 96mm x 62mm / 3.78" x 2.5" Cartridge Size:110mm x 90mm x 9mm / 4.33" x 3.54" x 0.35" Optical Class: 1/1/1/1 Reaction Time: 0.00004(1/25,000) Seconds  Dark to Light:  0.1, 0.25, 0.4, 0.55, 0.7 Seconds Light State: Shade DIN 3 Dark State: Shade DIN 5-8/9-14 DC TIG Amperage Rating: >2 Amps Battery Type: Solar Cell + 1X CR2450 (Replaceable)  Helmet Material: High Impact Polyamide Nylon Operating Temperature: -10°C- 55°C (14°F-131°F) Storage Temperature: -10°C- 55°C (14°F-131°F) Meet Standards: ANSI Z87.1 / EN379 CE / CSA Z94.3