Glow in the Dark 3D Printer Filament PLA/ABS 1.75mm 1kg/2.2lb Plastic Consumables For 3D Printer

SPECIFICATIONSBrand Name: SunDcreateForm: solidOrigin: Mainland ChinaMaterial: PLA/ABSModel Number: Glow in the DarkForm: FilamentDiameter: 1.75mmColor: Glow Green/BlueUesd for: 3D PrinterN.W.: 1.00KGG.W.: 1.35KG Specifications: 3D Printer Filament 1.75mm ABS/PLA Size:1.75mm+/-0.05mm Length: 1kg 1.75mm ABS- 400m 1kg 1.75mm PLA- 335m Printing Temperature: ABS:230 - 270℃ PLA:200 - 250℃ What's in the Package: 1kg spool 3D printer filament Dimensions:200 x 200 x 65mm Inner Diameter:56mm Net Weight:1kg/2.2lb Color: ABS(2 colors):glow green, glow blue. PLA(2 colors):glow green, glow blue. ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics: 1. High strength, good toughness; 2.Density is small, when printing larger volume model lighter, save money; 3.Cost-effective, can be processed in wide range temperature; 4.ABS softer than PLA; 5.PLA has low shrinkage rate, even print larger models perform well; 6.1 kg /plastic spool packaging, can be automatic feed; 7.To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc; 8.No Bubble. Quality control: 1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest REACH certificate. 2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer. 3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it. 4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it. Products Picture: