LOC Precision 1.6" Dia LaserLOC 163

  LOC Precision has been around for over 25 years! The LaserLOC series was one of the first production minimum diameter kits available to the public. Keeping the tradition going we have a few modern-day tweaks that will put your skills to the test. A gentle laser-etch around the slots allows for easier glassine removal. Multi-slot airframe allows the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today's higher-impulse motors. Fiberglass should be applied with a long-cure epoxy for best results. If you have never glassed anything before, here's your chance! The booster is a zipperless design. 1/4" Launch lugs included. Fly-away rail guides or conformal rail guides are other alternatives. Strong enough for supersonic flights. Light enough on your wallet to fly an E motor!!! Finishing Using a high-build primer apply 2-3 coats. sand with 400 until spirals are filled. Paint