Atomrc Swordfish FPV Aircraft

ATOMRC Swordfish FPV RC Plane Fixed Wing Flying Aircraft Build for FPV, Intelligence flight. -Flight controller have two firmware INAV or Arduplane, both firmware already pre-turned for the plane. RTH and RTH FPV version are plug and play, use just plug theire receiver and battery, plane is ready to go just like racing drones, no need glue or installed the electronics.  Arduplane version is also available, we can upload arduplane parameter setting on our web, you just need flash the arduplane firmware, load the settings. Specifications:Wingspan:1200mmLength:810mmMaterial: EPPWingArea:15.35 dm²Package size:815*220*185mmRecommend motor: 2004~2306Recommend prop: 7045Recommend battery: 4s 5000mAh/21700 1P4sServo: 4Pcs 9g servoItem weight: 1.4kgPackage size: 84*25.2*22.5 cm Easy for beginners, pre turned and pre-installed electronics.  KIT Version Included:1x Pre-glued fixed wing1x Wood Plate1x Screws and Nuts1x Sticker1x Manual1x Flight LightPNP Version Included:1x Pre-glued fixed wing1x Wood Plate1x Screws and Nuts1x Sticker1x Manual1x Flight Light2x ATOMRC 2306 1600KV Motor2x ATOMRC BLS 30A 2-4S ESC4x ATOMRC 9g Servo4x 7042-2 PropellerRTH Version Included:1x Pre-glued fixed wing1x Wood Plate1x Screws and Nuts1x Sticker1x Manual1x Flight Light2x ATOMRC 2306 1600KV Motor2x ATOMRC BLS 30A 2-4S ESC4x ATOMRC 9g Servo4x 7042-2 Propeller1x ATOMRC F405 NAVI Flight Controller1x BN220 GPS Module AtomRC Swordfish Setup and INAV: ATOMRC Swordfish review with setup tips: