Static Phase Converter runs 1~3HP, 230VAC, 3-Phase Motors w/Single Phase Power

AUcontrols. Static Phase Converter Mod: ASPC-3HDRuns 1 to 3 HP, 3-Phase, 230VAC MOTORS with Single Phase Power  Static Phase Converters will give ONLY 60% of the Motor's HP. DESIGNED FOR LIGHT TO MEDIUM LOADS (MOTORS ONLY!)HP Range: Min: 1 - Max: 3.Input Power Supply: Single Phase 208 - 240 VACSingle Phase FLA: 9.6 Amps. Max.Dimensions: 6" X 6" X 4".1 Year Warranty. IMPORTAT: > Do not buy a bigger Static Phase Converter than your Motor's HP thinking that you will get more power. It will NOT run, nor get a smaller Converter because it will not work either! Static Phase Converters DO NOT generate the 3rd Phase!  >Your Motor HP has to be between the Static Phase Converters HP to run properly.> If you are using a Motor Starter make sure the Motor Starter's Contactor's coil is fed from L1 & L2 (230VAC) otherwise it will not start.> You Can Run: Lathes not fitted with clutch, Milling & Drilling machines, Saws, etc.   WARNING! > For Air Compressors, blowers, water pumps and hydraulic pumps with pulley, the Motor's pulley diameter MUST BE REDUCED 1/3 or a 50% larger Motor can be fitted.You can use your motor with heavy starting cycles, frequent starting, instant reversing, etc. Keep in mind that Static Phase Converters will ONLY GIVE 60% OF MOTOR's rated HP. Installation Diagram Click Here