(C41) .8ch Rack'd Tour Ready QLXD by Shure 8 Channel Ready to Use Wireless System -with 2 paddle antennas
We specialize in building Easily Transportable Wireless Systems For Theatre or Performance Our Rack'D TOUR READY 8 channel QLXD system is built around 8xQLXD14 digital over UHF systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a industry standard active antenna distribution system (CA.D29), Uninterruptible Power Supply and Forced Cooling System -all this built into a an SKB Shock Mount Rolling Case ) or ATA Shock Mount Rolling case Our systems always cost less than the sum of the parts using Shure products throughout, but provide the same level of performance: Tour Grade system uses our active Creative Audio CA.D29 dual 9 way antenna distribution system so the whole system runs on just 2 x antennas, and bodymics Broadway BLF4 lavalier/hairline microphone elements. From Sweetwater - Shure equivalents 8x Shure QLXD14 receiver and bodypack sytems @ $999.00 = 7,992.00 2x Shure UA845 active antenna distribution units @ 614.00 = 1,228.00 2x Shure UA874US LPDA directional antennas @ 404.00 = 808.00 10x Shure WL93 tan/black lavalier microphones @ 83.00 = 830.00 1x Surge Protector @1799.95 = 1,799.95 1x Forced Cooling System @ 795.00 = 795.00 1x SKB 10u Shock Mount Case @ 972.99 - 972.99 ------------------------------------------------------------------------ TOTAL $15,625.94 If you purchased all the items including internal wiring, hardware etc it could cost close to $20K but we are charging just $14,899.00 - around $700 less but then we include the the labor to unpack, assemble, test and ship, and we also include the following: Power'D Power Supply system that gets rid of the 8 wall warts and replaces them with a single powerhouse supply - save over $120 our premium XLR loom - 8 cables 10ft long - value over $120 Antenna In/Out Panel a Pair of 25ft BNC-BNC cables for remote antennas (or 15ft + 50ft) Network Switch to link the receivers together for group frequency scan and firmware updates assembly - put everything into the rack, cable it and test it - around $700 order and gather all the necessary parts unpack everything assemble the QLXD4 receivers - add rack ears/joiners unpack the SKB R4S rack and prep for use bolt the QLXD4 receivers into rack mount the Power'D power supply system mount the active antenna distributor and cable mount and cable the network switch fit Antenna Panel connect the XLR looms to each receiver and anchor to rack attach channel numbers to each receiver and each transmitter run group scan at our location sync the transmitters to it's matching receiver connect the XLR outputs into a test sound system unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies repack for shipping TOTAL TIME ABOUT 7-8 HOURS Other microphone and case options are available - contact for a quote BMRD BMSW BMRDSW BMRDSB