AudioControl ACX-300.4 4-channel powersports/marine amplifier 50 watts RMS x 4 + Polk Audio DB 652  6-1/2" 2-way car speakers + DB 692 6"x9" 3-way car speakers

AudioControl ACX-300.4 4-channel powersports/marine amplifier 50 watts RMS x 4 + Polk Audio DB 652 6-1/2" 2-way car speakers + DB 692 6"x9" 3-way car speakers

$549.95
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

    AudioControl ACX-300.4 4-channel powersports/marine amplifier 50 watts RMS x 4 + Polk Audio DB 652  6-1/2" 2-way car speakers + DB 692 6"x9" 3-way car speakers      AudioControl ACX-300.4 4-channel powersports/marine amplifier — 50 watts RMS x 4     Waterproof power One of the main issues with powersports amplifiers used to be that the amp wouldn't survive a thorough washing of your vehicle after a good day of dirty fun. AudioControl's ACX-300.4 four-channel amplifier carries an IPX6 waterproof rating, which means you can clean it off with a powerful water jet spray and it won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections.   Play your music loud and clear The ACX-300.4 can send out 50 watts RMS per channel — plenty enough to hear your music clearly over the sounds of wind and motor. Like it loud? This amp can also operate in two-channel mode to power a pair of high-performance speakers with 150 watts RMS each.   Some practical features This tiny, hand-size amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. To simplify setup, a "Maximized" LEDs indicate when you've set the amplifier's gains for optimum performance.     Product highlights: 4-channel powersports/marine amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged at 4 ohms Class D amp technology selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave) on front and rear channels More Info: IPX6 rated chassis will withstand power washing waterproof input, output, and power connections preamp and speaker-level inputs GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input wiring and hardware not included with amplifier 8-gauge power and ground leads recommended dimensions: 10-3/4"W x 2-7/16"H x 3-7/8"D warranty: 5 years     What's in the box: AudioControl ACX-300.4 owner's manual   4-Channel amplifier (attached 12" power/ground/input/output harnesses) 7" Power & ground harness (10 ga.) Two 7" speaker output harnesses Power & ground harness (empty) 2 Crimp-on terminals for power & ground harness Harness locking pin 2 Rubber grommets Four 3/4" screws Quickstart guide       Polk Audio DB 692 DB+ Series 6"x9" 3-way car speakers     Stellar performers If you're building your new system on a budget, Polk Audio's DB+ Series speakers are a dynamite value as well as being stellar performers. Their journey to excellence begins with a laser-imaged design that ensures minimal distortion, a smooth response, and incredible sonic detail.    Honed Polk perfection These DB522 3-way speakers feature a 6"x9" polypropylene woofer cone with a strong rubber surround for solid playback and resilience under the environmental stress that comes with living in your car doors. Two silk dome tweeters deliver smooth highs with precision to give you a vibrant soundstage, while a built-in crossover keeps the highs and lows flowing to the proper drivers.   Handles up to 150 watts RMS With power handling up to 150 watts RMS, you'll do fine driving this system with an aftermarket receiver, but these speakers will love life if you power them with a nice amp.   For custom installation Polk includes mounting hardware, along with boldly designed grilles that add flare to your vehicle's interior if you're doing a custom installation.     Product highlights: 3-way car speakers (pair) marine certified — recommended for fresh water and powersports applications 6"x9" polypropylene woofer cone with rubber surround 3/4" silk dome tweeter and 1/2" supertweeter handles up to 150 watts RMS (450 watts peak power) frequency range: 30-22,000 Hz sensitivity: 93 dB top-mount depth: 3-1/4" grilles included     What's in the box:     Two 3-way speakers 2 Bottom-mount brackets 2 Grilles 2 Polk factory grille badges Two 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other) 4 Red plastic butt connectors Eight 1" Stainless steel screws 8 Stainless steel speed clips Owner's manual Online registration information     Polk Audio DB 652 DB+ Series 6-1/2" 2-way car speakers — also fit 6-3/4" openings     Stellar performers If you're building your new system on a budget, Polk Audio's DB+ Series speakers are a dynamite value as well as being stellar performers. Their journey to excellence begins with a laser-imaged design that ensures minimal distortion, a smooth response, and incredible sonic detail.    Honed Polk perfection These DB652 2-way speakers feature a 6-1/2" polypropylene woofer cone with a strong rubber surround for solid playback and resilience under the environmental stress that comes with living in your car doors. A 3/4" silk dome tweeter delivers smooth highs with precision to give you a vibrant soundstage, while a built-in crossover keeps the highs and lows flowing to the proper drivers.   Handles up to 100 watts RMS With power handling up to 100 watts RMS, you'll do fine driving this system with an aftermarket receiver, but these speakers will reach peak performance if you power them with a nice amp.   Cool looks, rugged construction Polk includes mounting hardware, along with boldly designed grilles that add flare to your vehicle's interior if you're doing a custom installation. These speakers are marine certified, too, so they're a great choice for open-top vehicles or even fresh water and powersports applications.   Note: Polk includes brackets to fit a 6-3/4" opening.     Product highlights: 2-way car speakers (pair) 6-1/2" polypropylene woofer cone with rubber surround 3/4" silk dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency range: 40-22,000 Hz sensitivity: 92 dB top-mount depth: 1-13/16" grilles included includes adapter rings for 6-3/4" openings marine certified - these speakers also work well for fresh water and powersports applications warranty: 1 year     What's in the box:     Unboxing video   Two 2-way speakers 2 Grilles 2 Mounting brackets (includes GM/Chrysler) Two 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other) 4 Red plastic butt connectors Eight 1" Mounting screws 8 Speed clips Owner's manual Online registration information    

Show More Show Less