Allen & Heath DLIVE-DX32 Modular Expander I/O Chassis for dLive

Complimenting the dLive Series of products from Allen & Heath is the DX32 Modular I/O Expander. This DX Expander allows you to add remote, modular I/O to a dLive system. It provides 4x 8ch slots to fit a selection of analog or digital I/O. Up to 2 DX32 Expanders can be connected to the MixRack, and a further DX32 can be connected to the Surface. The DX32 is a fully modular expander that features 4 slots for 8 channels of high end, low noise microphone preamps, 8 analog outputs, 8 AES/EBU (32-192kHz sample rate, stereo) digital inputs & 8 AES/EBU (44.1, 48, 88.2, 96kHz switchable per output) digital outputs. The DX32 has slots for 1 or 2 hot swappable redundant power supplies and a unique auto firmware matching feature keeps the DX32 in sync with the rest of the dLive system. Includes DX32 I/O expander Getting Started Guide AP10242 Safety Sheet IEC mains lead 4x M6 screws and washers for rack mounting Features 4x 8ch modular design Redundant, hot swappable power supply Independent 48v indicator Dual redundant Cat5 link to Surface or MixRack Rack-mounted or shelf / floor operation Auto firmware matching Ethernet L2 compatible Specifications Inputs: Mic/Line XLR Inputs: Balanced XLR, +48V phantom power Mic/Line Preamp: Fully recallable Input Sensitivity: -60 to +15dBu Analog Gain: +5 to +60dB, 1dB steps Pad: -20dB Active PAD Maximum Input Level: +30dBu (PAD in) Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in) Mic EIN: -127dB with 150Ω source Phantom Power indication: Per socket, internal or external phantom power sensing, triggered at 24V Digital Inputs: AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω SRC on each pair, range 32k - 192kHz, with bypass option Outputs: Analog XLR Outputs: Balanced, Relay protected Output Impedance: Nominal Output: +4dBu = 0dB meter reading Maximum Output Level: +22d Residual Output Noise: -92dBu (muted, 20-20kHz) -90dBu (muted, 20-40kHz) Digital Outputs: AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω 96kHz sampling rate, switchable to 88.1kHz, 48kHz, 44.1kHz System: Sampling Rate: 96kHz +/- 20 PPM ADC: 24-bit Delta-Sigma DAC: 24-bit Delta-Sigma Latency: + 8 samples, DX32 to Mixrack or DX32 to Surface (DX hop) System latency: + 5 samples, Surface to Mixrack (GigaACE hop) Operating Temperature Range: Fitted with MPS16 V1 300w: 32°F to 95°F (0°C to 35°C) Fitted with MPS16 V2 250w: 32°F to 104°F (0°C to 40°C) Power: Mains Voltage Operating Range: 100-240V AC, 50/60Hz Mains Power Consumption: 300W max (MPS16 V1 300W)* 250W max (MPS16 V2 250W)* *MPS16 power consumption is printed under AC inlet Dimensions and Weight: DX32 (W x D x H x Weight): 17” x 11.4” x 7” x 23lbs (433 x 290 x 177 mm x 10.5kg)