Ashly MXA 1502 12x4 Mixer Amplifier, w/ DSP, Network Connectivity

Equipped with the powerhouse Ashly AquaControl software™, the mXa-1502 mixing amplifier is an all encompassing solution for multi-zone music distribution, paging, automatic mixing, and more. This 12x4 mixer is enables you to process 12 audio inputs into four different areas. Designed to be powerful and discreet, this single rack space device includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads. AquaControl™ provides convenient access from many browser-based device—no additional equipment or apps needed. Applications Hospitality Education Sports House of Worship Includes Ashly AquaControl™ Software Inputs: Programmable Analog Mic Preamps, Phantom Power On/Off, Gain with Link Group Assign and Polarity switch, Remote Gain, DVCA Gain, Meter with Peak Hold Equalizers, 31-band Graphic — Constant or Proportional Q, 10-band Parametric EQ + HPF / LPF, and Signal Generator Delay Dynamics: Compressor, Auto Leveler, Clip (Brick Wall Limiter), Gate, Anti-Feedback (AFC) Mixer 1-4, Matrixing, Automixers, Ducker Outputs: 31-band Graphic — Constant or Proportional Q, 10-Band Parametric, FIR Filters, 2/3/4-way Crossover, Ambient Noise Control, Delay, Dynamics (same as Inputs), Signal Generator, Meter with Peak Hold Compatibility: Windows® OS 10, Mac® OS 10 and later, Linux Web Browsers, Chrome for Windows®, OS X, iOS, Android®, Safari for OS X, and Edge for Windows® Event Scheduler (Calendar), Event Logs, and Reports Features 8-balanced Mic/Line Inputs Precision Class A mic preamp design 4 Stereo Line Inputs and 4 Outputs 2 x 150W Class D Amplifiers with selectable Multi-mode operation (2/4/8 Ohm + 25/70/100V) Four convenient front-panel buttons for source/preset select Scheduler and RTC (Real-Time Clock) allows user-defined automatic, timed activation of various operations Generous integration I/O, including: Network, Serial, GPIO, VC, Standby & Fault (works with the WR-1, WR-1.1, WR-1.5, and WR-2 remotes) Compact 1U design reduces rack space requirements Specifications Damping Factor: >250 (8 Ohm load Distortion (SMPTE, typical): < 0.5% Distortion (THD-N, typical): < 0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz) Channel Separation: –75dB (dB from full output, 1kHz) Signal-to-Noise (unweighted): 20Hz-20kHz, Gain@26dB Frequency Response: 20Hz-20kHz, ±0.05dB Balanced Input Connector: Euroblock 3.5mm Input Impedance: 10k Ohms Maximum Input Level: +21dBu Speaker Output Connector: Euroblock 7.62mm Nominal Voltage Input: 100 – 240VAC Operating Range: 70 – 270VAC Power Supply Type: SMPS with active PFC AC Mains Line Cord Connector: Detachable Nema 5-15 for USA Control Network: RJ-45 connector, 1GB Ethernet AUX Output Connector: Balanced Euroblock 3.5mm AUX Output Maximum Level: +21dBu Data Connection: Euroblock 3.5mm – Gnd, +18V, Data Out, Data In Fault Condition Logic Outputs : Euroblock 3.5mm – fault indicated by loss of 1Hz “heartbeat” pulse signal Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting Cooling: Continuously variable temperature controlled fan Unit Dimensions: 19” x 1.75” x 14.54” Dimensions: 25.2” x 2.5" x 19.5” Weight : 13.0 lbs