Kramer KDS-8 Zero Latency 4K HDR SDVoE Video Streaming Transceiver

Kramer's KDS-8 zero latency 4K HDR SDVoE (Video over Ethernet) streaming transceiver supports video up to 4K@60Hz (4:4:4) for operation over standard copper Ethernet cable. The KDS-8 encodes HDMI signal input for streaming over a local network and features an analog audio port allowing you to embed audio into the stream. It can also be used as a decoder to output the signal to a connected display via standard HDMI cabling. The KDS-8 also passes bi-directional InfraRed Remote and RS232 control data along with the video stream. Kramer KDS-8 Features: User configured as encoder or decoder Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface providing lossless compression Fully standard and compliant SDVoE codec. Streaming Support — Multicast, Unicast. Powered by the network (PoE) Video wall and multiview support Managed by KDS-8-MNGR HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support Kramer KDS-8 Specifications: Inputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Outputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Ports 1 10GbE Ethernet: On an R–J45 connector 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 1 1GbE Ethernet: On an R–J45 connector 1 RS-232: On a 3–pin terminal block connector Video Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, Extension Line Signal Compression: Ultra–light compression, lossless for most content Range: Up to 100m in point–to–point mode Audio Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates Power Source: 12V DC Consumption: 3A PoE Budget: 25W (not including cable loss) Environmental Conditions Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing Humidity: 10% to 90%, non–condensing Product Dimensions: 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H Product Weight: 0.5kg (1.1lbs) approx. Shipping Dimensions: 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H Shipping Weight: 1.2kg (2.6lbs) approx.