Shure BLX1288/CVL Wireless Combo System with PG58 Handheld and CVL Lavalier

Features BLX2 with PG58 and CVL Lavalier Microphone Environments: Club, Live Performance, Place of worship, Rehearsal Space Industries: Education, House of Worship Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. Frequency Range and Transmitter Output Level Band Range Output Power H9 512 to 542 MHz 10 mW h20 542 to 572 MHz 10 mW h21 572 to 596 MHz 10 mW J11 596 to 616 MHz 10 mW Includes 1 - BLX88 dual-channel receiver 1 - BLX1 bodypack transmitter 1 - BLX2/PG58 handheld transmitter 1 - CVL lavalier microphone 1 - PS24 Power Supply 1 - WA371 Swivel Adapter 1 - 31B1856 Thread Adapter 1 - microphone clip 1 - lavalier clip 1 - lavalier windscreen user guide BLX88 Specs Output Impedance XLR connector 200 Ω 6.35 mm (1/4") connector 50 Ω Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone XLR connector –27 dBV (into 100 kΩ load) 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load) RF Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 1.50 in. X 12.13 in. X 3.98in. (38 mm X 308 mm X 101 mm) H x W x D Weight 15.1 oz. (429 g) Housing Molded ABS Power Requirements 12–15 V DC @ 235 mA (BLX88, 320 mA), supplied by external power supply (tip positive) BLX1 Specs Audio Input Level max -16 dBV maximum min (0 dB) +10 dBV maximum Gain Adjustment Range 26 dB Input Impedance 1 MΩ RF Transmitter Output 10 mW, typical varies by region Dimensions 4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D Weight 2.6 oz. (75 g), without batteries Housing Molded ABS Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life up to 14 hours (alkaline) BLX2 Specs Audio Input Level 0dB -20 dBV maximum -10dB -10 dBV maximum Gain Adjustment Range 10 dB RF Transmitter Output 10 mW, typical varies by region Dimensions 8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia. Weight 7.7 oz. (218 g) without batteries Housing Molded ABS Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline Battery Life up to 14 hours (alkaline) CVL Specs Type Electret Condenser Frequency Response 60 Hz to 12,000 Hz Polar Pattern Unidirectional (Cardioid) Output Impedance @ 1 kHz 600 Ω Audio Output Level -43.5 dBV/Pa Signal-To-Noise Ratio [1] @ 1 kHz 72 dB Maximum SPL [1] 1000 Ω load, @ 3%THD 139.0 dB Dynamic Range [1] @ 1 kHz, 1000 Ω load 117.0 dB Equivalent Output Noise [1] typical, A-Weighted 22 dB Power Requirements +5 V DC (nominal), 10 V maximum (DC bias) Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 Cable 1.3 m (50 in.) Connector TA4F Net Weight 25 g (0.88 oz.) [1] Measurements taken using RK100PK preamp set @ 0 dB using 8k bias resistor. *All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.