
Autel MaxiPRO MP808TS Prime Version of MS906TS
Autel MaxiPRO MP808TS Automotive Diagnostic Scanner with TPMS Service Function and Wireless BT (Prime Version of Maxisys MS906TS)Burst Point of Autel MaxiPRO MP808TS: OE-Level Diagnostics: The MP808TS performs a wide-range of OE-level diagnostics for all electronic systems. Besides of all the functions of the MK808, you can use this Autel scanner to carry out advanced Bi-directional Control and the Guided Function of VW and Benz. It is a combination of advanced diagnostics and complete TPMS functions Full TPMS Diagnostics: Autel MP808TS offers comprehensive TPMS functions to handle TPMS related problems with maximum convenience. Feel free to use this Autel scanner to quickly check the status of the Tire Pressure Management System, and perform 98% of TPMS sensor activation, Autel MX-sensor programming, and TPMS relearn for more than 80 US, Asian and European vehicle makes and models 25+ Service Functions: MP808TS has been updated from 18 service functions to 25 service functions. While enjoying the original functions including Oil Reset, Throttle Matching, EPB Reset, BMS Reset, etc. you can also perform newly added Cylinder, Turbocharging, Clutch, and Trans Adaption when needed. NOTE: Supported services functions vary from vehicle to vehicle. Welcome to contact us to know more about the adaptability of 25 service functions in the tested vehicles Active Tests: Autel MP808TS supports active test, you can take information from the scanner and also give commands to the automobile through this Autel scanner. By interactively operating and testing vehicle devices like wipers, door controls, windows, a/c, engine fans, idle control, etc., you are able to fully understand the nature of the car problems User-Friendly Design: 7 -inch LCD touch screen with 1024*600 display quality; Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time; Automatic system and software updates with real-time push message notifications via Wi-Fi. Within 30 days since the date of purchase, feel free to apply for a return or replace service Autel Official Store MP808TS MP808 MK808TS MK808 RAM 1G 1G 1G 1G ROM 32G 32G 32G 32G battery capacity 5000 mAh 5000 mAh 5000 mAh 3200mAh Android version Android 4.4.2 Android 4.4.4 Android 4.4.2 Android 4.4.4 Screen size 7inch 7inch 7inch 7inch Screen resolution 1024x600 1024x600 1024x600 1024x600 Wi-Fi 2.4 & 5 GHz 2.4 & 5 GHz 2.4 GHz 2.4 GHz Net Weight 0.885kg 0.788kg 0.885kg 0.788kg Remote Desk √ √ √ √ Connection VCI Mini / Bluetooth main cable VCI Mini / Bluetooth main cable Auto VIN √ √ √ √ Auto SCAN √ √ √ √ Full OBD2 Functions for All Systems √ √ √(read/erase codes,read ECU info.,data stream) √(read/erase codes,read ECU info.,data stream) Commonly used Special Functions √ √ √ √ Replacement of Control Unit for Some Software √ √ X X Guidance Function √ √ X X Advanced TPMS(sensor programing/activation) √ X √ X Language English, Simplified Chinese, Traditional Chinese, Spanish,French, German, Polish, Italian, Japanese, Korean, Dutch,Portuguese, Swedish,Russian More Functions welcome to contact us sales@autelmaxisys.com Checking Compatibility https://www.autel.com/vehicle-coverage/coverage2 Autel MaxiPRO MP808TS - Wireless Diagnoses MP808TS = MP808/DS808 + TS601 Supported Languages: English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Italian, Japanese, Russian ( Please tell us about your S/N of machine to activate the language you need after you get it. Thanks~) Ⅰ. Introductions AUTEL MaxiPRO MP808TS is your perfect companion. Featuring a fast quad-core processor, MP808TS offers maximum convenience and swift diagnosis. The intuitive user interface makes using the device effortless through a 7-inch LCD touch-screen that displays at 1024 x 60 0 quality. With the ability to quickly read and clear Original Equipment Manufacturers (OEM) enhanced codes for TPMS module of the majority of the makes and models on the market, MP808TS provides you with superior special functions for TPMS services with ease. Autel MaxiPRO MP808TS - Wireless Diagnoses Ⅱ. Bullet Points 1. Complete TPMS Functions: The diagnostic tool is capable of activating/reading 98% of known TPMS sensors, reading and clearing TPMS codes, displaying manufacturer-specific TPMS Relearn procedures for all vehicles, performing OBDII Relearns and programing MX-Sensors to replace OE sensors. 2. Full system Functions: Read and clear trouble codes for all systems; find and fix related problems and turn off the warning lights. 3. Special Features:·Advanced diagnoses with complete TPMS function help users detect tire pressure; along with Oil/EPB/SAS/BMS/DPF/ IMMO and ABS/SRS services for accuracy and efficient vehicle diagnostic results. 4. Wireless Function: Wi-Fi and Bluetooth Vehicle Communications Interface (VCI) enables the unit to perform wide-range OE-level diagnostics. 5. One-Click Test: Supports all vehicle systems’ quick test with one click for codes definition and troubleshooting, and one step for complete TPMS health check. Ⅲ. Comprehensive Diagnostic Functions 1. Exceptional OE-level system coverage for all electronic systems 2. Read/Erase Codes, Display Freeze Frame and Live Data, Perform Active/Actuation Tests and Adaptations 3. Auto VIN technology enables instant vehicle make, model and year identification Ⅳ. Advanced TPMS diagnostics with code description 1. At-A-Glance TPMS Status screen— One-Step Complete TPMS health check 2. Activate 98% of all known TPMS sensors Program AUTEL MX-Sensor 3. Comprehensive OBDII relearn coverage 4. Displays vehicle-specific Relearn procedure for all manufacturers 5. Perform OBDII TPMS Sensor Relearn Ⅴ. Full Systems Diagnoses In All Vehicle Systems on the ECUs Autel MP808TS can access to ALL vehicle systems and subsystems, such as Body, Chassis, Powertrain, Network and etc ., to perform a comprehensive scanning on ECUs to locate fault systems and retrieve DTCs. 1. To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation; 2. To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined; 3. To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions; 4. To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car; 5. To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly; 6. To diagnose Light System if you see rapid signal blinking or dimming lights. And many more ... Ⅵ. Special Functions 1. Oil Reset Service to reset service mileage and service intervals for the Engine Oil Life system; 2. TPMS Service to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements; 3. EPB Service to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.; 4. ABS/SRS Services to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.; 5. SAS Service to perform calibration for the Steering Angle Sensor, and clear fault memory; 6. DPF Regeneration Service to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter 7. BMS Service performs a reset on the vehicle battery for clearing the fault information and re-match the battery; 8. Brake Bleed performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light; 9. IMMO Service clear the lost car key’s information and program the new key into the ECU database to protect user’s car from being stolen; 10 . Injector Coding writes the new code to the ECU after replacement of injector, so that the injector works; 11. Throttle Adaptation initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately; 12. Tire Pressure Monitor System Reset (TPMS Programming Service): Quickly looks up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced. 13. Headlamp 14. Suspension 15. CHG tire size 16. TEC learn 17. WIN DR ROOF 18. Seats 19. Odometer 20. Lang change Ⅶ. Active Test During the actuation test , MP808TS outputs command to the ECU in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators, such as switching an injector between two operating states. (This option is used to access vehicle-specific subsystem and component tests. Available test varies by the vehicle manufacturer, year, and model.) Ⅷ. Other Supportive Features 1. Shop Manager feature keeps all data files, customer information, and vehicle records and history well organized on tablet 2. Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes 3. Automatic system and software updates with real-time Wi-Fi push notifications 4.Remote control technology enables support to quickly repair or update tool 5. One-stop multitasking is designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized. Ⅸ. Features 1. Compatible with domestic, Asian and European vehicles, 1996 and newer 2. Exceptional OE-level system coverage for all electronic systems 3. Read/Erase Codes, Display Freeze Frame and Live Data, Perform Active Tests and Adaptations 4. Auto VIN technology enables instant vehicle make, model and year identification 5. Advanced TPMS diagnostics with code description 6. At-A-Glance TPMS Status screenOne-Step Complete TPMS health check 7. Activate 98% of all known TPMS sensors 8. Program AUTEL MX-Sensor 9. Comprehensive OBDII relearn coverage 10. Displays vehicle-specific Relearn procedure for all manufacturers 11. Perform OBDII TPMS Sensor Relearn: Shop Manager feature keeps all data files, customer information, and vehicle records and history well organized on tablet 12. Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes 13. Automatic system and software updates with real-time Wi-Fi push notifications 14. Remote control technical enables support to quickly repair or update tool Advanced Hardware Configurations Ⅹ. Extensive Vehicle Coverage - More than 80 Makes Asia: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Toyota... Europe: Abarth, Alfa, Audi, Bentley, Benz, BMW, Bugatti, Citroen, Dacia, EU Ford, Fiat, Jaguar, Lancia, Land Rover, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW... USA: Chrysler, Ford, GM... Australia: AU Ford, Holden... Please contact us for compatibility problem, we will check for you~ Ⅺ. Supported Languages English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian. ( Please tell us about your S/N of machine to activate the language you need after you get it. Thanks~ Specifications Operating System : AndroidTM 4.4.2, KitKat Processor: Cortex-A9 quad-core processor (1.4 GHz) Memory: 32GB Display: 7-inch LCD capacitive touchscreen with 1024x600 resolution Connectivity: Mini USB 2.0 USB 2.0 / Wi-Fi / HDMI Type A / Micro SD card slot (supports up to 32GB) Sensors: Light sensor for brightness auto adjust Audio input/outputInput: N/A Output: Beep Power and Battery: 3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply Tested Battery Life: Around 7 hours of continuous use Battery Charging Input : 5 V/1.5 A Power Consumption: 600 mA (LCD on with default brightness, Wi-Fi on) 3.7 V Operating Temp: 0 to 55°C(32 to 131°F) Storage Temp: -20 to 60°C (-4 to 140°F) Operating Humidity: 5% - 95% non-condensing Dimensions: (W x H x D) 270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”) Net Weight: 885 g (2.31 lb.) Protocols: ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 Packing List 1 * MP808TS 1 * USB Cables 1 * Power Adapter 1 * User Manual 1 * Quick Guide Other Screenshots for reference