Audio-Technica ATM350GL Condenser Microphone (Factory Re-Certified)

Designed for use with guitars, the ATM350GL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9" gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features SpecificationsContents Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source UniMount® guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hypercardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Cardioid Frequency Response 40 – 20,000 Hz Low Frequency Roll-Off 80 Hz, 12 dB/octave Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa Impedance 200 ohms Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical) 130 dB, 1 kHz at Max SPL Signal-To-Noise Ratio 65 dB, 1 kHz at 1 Pa Phantom Power Requirements 11– 52V DC, 3.5 mA typical Switch Flat, roll-off Output Connector (Power Module) Integral 3-pin XLRM-type Cable 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector Optional Interchangeable Elements UE-H hypercardioid (100°) and UE-O omnidirectional (360°) Audio-Technica Case Style M36 (1) ATM350a Cardioid Condenser Microphone(1) AT8543 Power Module(1) AT8491G UniMount® Guitar Mount(1) AT8490L UniMount® 9" Gooseneck(1) AT8468 Violin Mount (Hook-and-Loop Fastener)(1) Protective Carrying Case function openCity(evt, cityName){var i, tabcontent, tablinks;tabcontent=document.getElementsByClassName("tabcontent");for (i=0; i