Appsys Multiverter MVR-64 mkII 64 x 64 Channel Digital Multi-Format Converter

Appsys Multiverter MVR-64 mkII 64 x 64 Channel Digital Multi-Format Converter For all your digital audio needs: This unique piece of hardware is able to convert between man different digital audio interfaces - any to any, all at once. It's fully packed with features like channel-wise-routing, web interface, sample rate conversion, headamp remote control and much more. And cool for MVR-64 (old model) users: All firmware features of the new model will also be back-ported as long as the hardware allows it! Key Features 704x704 channels routing matrix with channel-wise routing/splitting between interfaces Bi-directional sample rate conversion up to 128 channels using the SRC-64 plug-in module Fully remote-controllable via Web, Web-over-USB and command line (telnet/UART) Web Remote Demo Headamp remote control for MIDAS®/Behringer® stageboxes Integrated headphone amp to monitor any incoming signal Audio Interfaces AES3 (16x16ch) ADAT (4x), SPDIF/AES3 optical MADI SFP (2x), supports Ferrofish SFP Coax MADI coaxial AES50 (up to 2 ports) MADI-TP (up to 2 ports) Dante Up to 192 extra channels via Flexiverter breakout boxes connected to the FlexLink port Clocking Options Supports 44.1...192 kHz operation ClockShield™ technology allows clickless operation during up to 1s clock dropouts Optional Sample Rate Conversion Other things to mention Preset store/recall (16 different setups) Jumperable pinout for AES3 (Tascam/Yamaha) and AES50/MADI-TP ports Test tone generator simplifies troubleshooting of complex setups Triple-redundant power supply (2x 90-240VAC, 1x 9-18VDC) Can be powered alone from industry standard 4-pin XLR plug battery packs Separate network control port MIDI and RS485 embedding/de-embedding from MIDI/RS485 jacks into MADI streams (RME™/DirectOut™-compatible) Transparent forwarding of MADI control data (i.e. headamp control, MIDI over MADI) Technical Specifications Dimensions 482x45x230mm (BxHxD) Weight 2.25 kg Operating temperature 0..+70°C, non-condensing Storage temperature -40..+85°C, non-condensing Power consumption 8W typ., 30W max. Each AC input: 85..264VAC, 50-60Hz, 0.75A@115VAC / 0.5A@230VAC DC input: 9-18VDC (up to 30V tolerant), 2.5A peak Channel count 704x704 total (up to 64x64 per interface) in x1 modes 352x352 (up to 32x32 per interface) in x2 modes 176x176 (up to 16x16 per interface) in x4 modes Multiple conversions (i.e. Dante ⬄ MADI and ADAT ⬄ AES50) with each using the full channel count can run simultaneously. Sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz +/-100ppm Varispeed operation is not supported Latency The table below shows the overall latency (receive+convert+transmit) between the various interfaces in number of samples. For x1 modes (32/44.1/48kHz), n is 1. For x2 modes (64/88.2/96kHz), n is 2. For x4 modes (128/176.4/192kHz), n is 4. ADAT ports 4 input+4 output ports with 8ch@44.1/48kHz, 4ch@88.2/96kHz each Each port may be alternatively used as SPDIF or AES3 optical port with 2 channels @44.1/48kHz USB port USB 2.0 (FTDI 2232). Remote control and firmware update, no audio connection RS485 port Male D-Sub 9pin, Yamaha AD8HR compatible Pinout: 2=RX-, 3=TX-, 4=TX+, 5=GND, 6=RX+ FlexLink port HDMI connector type (Note: *NOT* HDMI compatible). 192ch@48kHz, 96ch@96kHz, 48ch@192kHz MADI SFP ports Standard SFP slot. SFP1 equipped with standard multi-mode fibre (MM fibre), 1310nm, LC connector, up to 2km total length. No vendor lock (Appsys policy). Supports Ferrofish SFP Coax 64ch@44.1/48kHz 32ch@88.2/96kHz 16ch@176.4/192kHz MIDI-over-MADI, RS485 embedding Transparent user bit forwarding MADI BNC port Standard AES10 coaxial port. Use with up to 100meters of 75 ohm coaxial cable 64ch@44.1/48kHz, 32ch@88.2/96kHz, 16ch@176.4/192kHz MIDI-over-MADI, RS485-over-MADI Transparent user bit forwarding MADI TP ports (shared with AES50) AES-X 213 compatible. 64ch@44.1kHz, 56ch@48kHz, 32ch@88.2, 28ch@96kHz, 16ch@176.4kHz, 14ch@192kHz Pinout: MADI-TP on 4/5, 7/8 MIDI-over-MADI, RS485-over-MADI Transparent user bit forwarding Compatible to DiGiCo®/Soundcraft®/Studer®MADI-TP using the MTA-64 Adapter AES50 ports (shared with MADI-TP) AES50 3.1 compatible 48ch@44.1/48kHz, 24ch@88.2/96kHz Pinout: Data on 1/2, 3/6; Sync on 4/5, 7/8 Dante/AES67 port 2x Gigabit Ethernet, configurable either as Switch or as Redundant connection in the Dante controller. Device prefix: MVR64 64ch@32/44.1/48kHz, 32ch@64/88.2/96kHz, 16ch@128/176.4/192kHz Wordclock port Output: 5.0Vpp nominal, able to drive two parallel 75 Ohm terminations Input: 0.5Vpp...5.0Vpp MIDI port Isolated input on 3.5mm TRS jack MIDI output on 3.5mm TRS jack MIDI THRU is activated by default Pinout according to MIDI-TRS specification Headphones 2x125mW into 32Ohm (@0.01% THD+N) Bandwidth: 22Hz to 22kHz ESD protection all ports: +/- 15kV (Human Body Model)