Audio-Technica ATW-3212NC710 EE1 3000 Series Network Wireless Handheld System with ATW-C710, EE1 530-590 MHz

Audio-Technica ATW-3212NC710 EE1 3000 Series Network Wireless Handheld System with ATW-C710, EE1 530-590 MHzThe Audio-Technica ATW-3212NC710 EE1 is an advanced 3000 Series Network Wireless Handheld System that caters to professional audio needs. With a state-of-the-art 60 MHz tuning range, this system significantly outperforms its predecessors. Available in multiple frequency bands, including DE2, EE1, EF1, FG1, GH2, and HH2, it provides exceptional flexibility in various regions and environments. This system configuration comes equipped with an ATW-R3210 receiver, ATW-T3202 handheld transmitter, and an ATW-C710 interchangeable condenser cardioid capsule. Designed with user convenience and reliability in mind, this system is perfect for live performances, speeches, and broadcasts.The ATW-T3202 transmitter, featuring robust metal housings and powered by two AA batteries, boasts an industry-standard thread for compatibility with multiple microphone capsules, including the included ATW-C710. The transmitter features a multifunction button that allows users to quickly switch to a backup frequency in case of unforeseen interference. Additionally, the system's IR sync functionality and frequency scanning make setup a breeze. Charging terminals on the transmitter are compatible with Audio-Technica's smart charging docks (sold separately), ensuring that you're always powered up for your next big event.The ATW-3212NC710 EE1 system promotes optimal performance with its balanced and unbalanced audio output jacks, antenna power for inline RF devices, and a ground-lift switch to eliminate hum caused by ground loops. Whether you're a sound engineer or a performer, this wireless system combines innovation and ease of use, making it a reliable choice for high-quality sound.Key Features 60 MHz UHF tuning bandwidth available in 6 frequency bands Multifunction button for quick frequency backup IR sync functionality and frequency scanning Industry-standard thread for interchangeable microphone capsules Charging terminals for NiMH batteries ATW-C710 condenser interchangeable cardioid capsule Specifications Microphone Element: Fixed-charge back plate permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 80 – 20000 Hz Impedance: 60 Ohms Power Requirements: 5 V DC Battery Type: Two 1.5V AA (not included) Weight: 114 g Dimensions: 84.4 mm long, 50 mm max. diameter Output Connector: Interchangeable industry-standard thread Operating Frequencies: DE2 (470-530 MHz), EE1 (530-590 MHz), EF1 (590-650 MHz), FG1 (650-700 MHz), GH2 (795-806 MHz), HH2 (821-865 MHz) Minimum Frequency Step: 25 kHz Modulation Mode: FM Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%), ATW-T3202: ±36 kHz (THD:10%) Simultaneous Use: 40 Channels per band Frequency Response: ATW-T3201: 31 Hz to 15500 Hz, ATW-T3202: 25 Hz to 16700 Hz Operating Range: 100 m Dynamic Range: ATW-T3201 Mic input: > 115 dB (A-weighted), typical; ATW-T3201 Inst input: > 112 dB (A-weighted), typical; ATW-T3202: > 115 dB (A-weighted), typical Total Harmonic Distortion: <1.0% (at 1 kHz ±17.5 kHz deviation) Operating Temperature Range: -5 ºC to +45 ºC Receiver: True Diversity Receiving System Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 Ω termination) Maximum Output Level: XLR / Balanced: +14 dBV, 6.3 mm (¼") / Unbalanced: +8 dBV Antenna Input: BNC-type, 50 Ω Power Output: 12 V DC, 160 mA (combined) Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A switched mode external power supply Receiver Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x H x D) Receiver Weight: 1100 g (without accessories) Handheld Transmitter RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 Ω Spurious Emissions: Following federal and national regulations Battery Life (Alkaline): High: 8.0 hours / Low: 9.0 hours Battery Life (Ni-MH 1900mAh): High: 9.0 hours / Low: 9.5 hours Handheld Transmitter Dimensions: 193.0 mm long, 37.0 mm maximum diameter Net Weight: 200 g Package Contents Two Flexible UHF antennas AC Adapter (country dependent) Rack Mount Adaptors AT8456a Quiet-Flex stand clamp 5/8"-27 male to 3/8"-16 female threaded screw adapter