Lectrosonics LT Digital Hybrid Wireless Beltpack Transmitter, B1 537.600 - 607.950 MHz
avlgear.com

Lectrosonics LT Digital Hybrid Wireless Beltpack Transmitter, B1 537.600 - 607.950 MHz

$1,508.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

AVLGEAR

View Store

Lectrosonics LT Digital Hybrid Wireless Beltpack Transmitter, B1 537.600 - 607.950 MHz The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless® receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship. The LT can be configured to operate as a "one touch" device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function. Key Features Covers two frequency blocks in the US; three in Europe Digital Hybrid Wireless® for compandor-free audio Selectable 50 or 100mW output power Compatibility modes for use with analog receivers 25 or 100 kHz tuning steps for up to 3072 selectable frequencies Integrated multi-function switch for mute or talkback modes Wide range input gain control in 1 dB steps IR port for setup with IR enabled receivers USB port for firmware updates Menu selectable mic or instrument input Optional battery eliminator Detachable antenna Technical Specifications Operating Frequencies Band A1 470.100 - 537.575 Band B1 537.600 - 607.950 Frequency Selection Steps Selectable; 100 kHz or 25 kHz RF Power output Selectable 50 or 100mW Compatibility Modes Nu Hybrid, IFB, Mode 3 Pilot tone 25 to 32 kHz; 3 kHz deviation (Digital Hybrid) 25 to 32 kHz; 3.5 kHz deviation (Nu Hybrid) Frequency Stability ± 0.002% Spurious radiation Compliant with ETSI EN 300 422-1 v1.4.2 Equivalent input noise -120 dBV (A-weighted) Input level Mic Nominal 2 mV to 300 mV, before limiting Greater than 1V maximum, with limiting Instrument 1M Ohm high level Input impedance Line 2k Ohm; Mic 300 Ohm Input limiter DSP controlled, dual envelope “soft” limiter with greater than 30 dB range Gain control range 44 dB; digital control Modulation indicators Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation LCD bar graph Controls Top panel slide switch; programmable as power, mute, talkback or no (off) function Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls Audio Input Jack Switchcraft 5-pin locking (TA5F) Antenna Galvanized steel, flexible wire Battery Two AA; alkaline, lithium, NiMH rechargeable Battery Life Duracell Quantum 4.75 hours Eneloop 2400 mAH NiMH 5.5 hours Weight 5.9 ounces (169 grams), with lithium AA batteries Dimensions 2.85 x 2.45 x .75 in. (72 x 62 x 19 mm) Emission Designator 110KF3E (LT) Frequency Response Line/Instrument 35 Hz to 20 kHz (+/-1dB) Mic input 35 Hz to 20 kHz (+/-1dB) Mic input LF roll-off Selectable knee at 35, 50, 70, 100, 120, 150 Hz THD 0.2% (typical) Included Accessories 2 - AA Batteries 1 - AMMXX (Specify Block) 1 - 26895 Wire Belt Clip (Installed on Transmitter)

Show More Show Less