
Sony RM-IP10 IP Remote Control Panel for BRC Cameras
Sony RM-IP10 IP Remote Control Panel for BRC Cameras The RM-IP10 is compatible with Sony's BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG300H, SRG-120DU, SRG-120DH and SRG120DS cameras when they are fitted with the BRBK-IP10 option board, and the BRC-Z700 camera when it is fitted with the BRBK-IP7Z option board. Easy and economical installation and set-up saves you time and cost. Key Features The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network The RM-IP10 is compatible with Sony's BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG300H, SRG-120DU, SRG-120DH and SRG120DS cameras when they are fitted with the BRBK-IP10 option board Up to 5 RM-IP10 control panels can be used on a single network allowing shared control and simultaneous multi-operator control of large camera systems The RM-IP10 can also control up to 7 BRC cameras over a traditional VISCA (Video System Control Architecture) network The RM-IP10 links to an IP network with via a RJ-45 connector providing very easy, low cost and speedy installation Technical Specifications Input/output connectors Control input/output VISCA RS-232C OUT Connector : Mini DIN 8pin type VISCA RS-422 connector: 9-pin type LAN : RJ-45, 10BASE-T/100BASE-TX automatically detected Tally In/Contact Out: 9-pin type Control signal format 9,600 bps/38,400 bps (for RS-232C/RS-422 communication) VISCA over IP communication Power Connector JEITA type 4 (DC IN 12V) Input voltage 12V DC (10.8 to 13.2V DC) Current consumption 0.3A max. (at 12V DC), 3.6W Operating temperature 0 to 40 (32F to 104F ) Storage temperature -20 to 60 (-4F to 140F ) Dimensions (W x H x D) 391.3 mm x 165 mm x 145.9 mm (15 inches x 6 inches x 5 inches) Mass Approx. 950g (2 lb 15 oz) User Interface Display No Speed Control No Zoom Seesaw Lever No Zoom Ring of Joystick Yes Zoom Control selectable Ring of Joystick ASSIGN button 0 Kensington lock hole No Camera Control Maximum IP Connections 112 Maximum Serial Connections 7 Control Protocol VISCA over IP/VISCA RS-422/VISCA RS-232C switchable max Controller qty (/sys) 5 Direct Function of Buttons/Knobs Exposure mode selection No One-push white balance auto adjustment No One-push black balance auto adjustment No Toggle color bars output on/off No Toggle backlight compensation on/off Yes Toggle flicker compensation on/off No Display the status of iris,gain,shutter speed and zoom position No R gain and B gain adjustment Yes *1 R black and B black adjustment Yes *1 Master black adjustment No Detail level display No Detail level adjustment No Knee point display No Knee point adjustment No AE level display No AE level adjustment No Iris setting display No Iris value adjustment Yes *1 Gain setting display No Gain value adjustment Yes *1 Shutter speed display No Shutter speed adjustment Yes *1 Supplied Accessories Supplied Accessories Operating Instructions (1) AC Power Adapter (SONY)(1) AC power cord (1) CD-ROM (1) RS-422 connector plug (attached to the unit) (2)