Poultry Drinking Nipple | Horizontal Side Mount | 12 Pack

Item Package Quantity:12 Product Installation and Tips Installation Using an 11/32” drill bit, drill 1 hole for each nipple placement. Holes should be at least 2” from bottom of container to avoid being clogged with sediment.  Insert threaded side of nipple in hole and hand tighten leaving approximately 1/8” to 1/16” gap. DO NOT MOUNT FLUSH. DO NOT OVER TIGHTEN If using a sealed container, drill a few vent holes near the top of the container to prevent a vacuum being formed. When properly installed, nipples should not leak however, plumber’s tape or silicone sealant may be used if desired. Be sure to follow manufacturer’s instructions and do not allow sealant to touch O-ring. Tips Use concrete or wood blocks to raise containers off of the ground keeping the nipples clean. If you have birds of various sizes, place nipples at various heights (height of their back is best). Nipples can be used with almost any plastic container including food grade plastic buckets, drums, and food cont