BLiNQ Networks FW-300i 3.5GHz LTE CBRS Base Unit without Embedded EPC Kit 10W Center Band 48 FCC
BLiNQ Networks FW-300i 20MHz LTE CBRS base unit without Embedded EPC Kit 10W Center FCC Bands 48 (without embedded EPC) is a single piece of hardware that is easy to set up, fits anywhere, and provides incredible network capacity. Simply place the FW-300i on the side of a building or water tower and it is ready to go immediately.Product Features: Brings massive capacity and standard LTE together Lowers installation time and operational cost by up to 6x Works with any LTE CPE on the market Integrated antennas are built-in for a "cell-in-a-box" solution Outperforms competitors in a frequency-2 reuse scenario Delivers the best cost per gigabit air capacity in the industry Product Specifications: Frequency Band: TDD LTE Bands 48 Transmit Power (Bands 42, 43) *: Max 33 dBm / sector of 60deg, 17dBi Integrated Antenna 50dBm EIRP/Sector Channel Bandwidth: 10, 20MHz (15MHz Road-map Support) MIMO: 6Tx x 6Rx (several possible MIMO configurations) LTE Compliance: 3GPP Release 10 (SW upgrade up to Release 13) Connected/Active UEs: Up to 96 active users per sector. 288 active users per Box Carrier Aggregation: Supports contiguous and non-contiguous 1CC, 2CC, 3CC, over entire band Throughput DL TDD: 3GPP Release 10 (SW upgrade to Release 13) Throughput UL TDD: 3GPP Release 10 (SW upgrade to Release 13) Operating Mode: TD-LTE Power: Consumption (Band 46) 80W max. Power: Consumption (Band 42,43,48) 150W max. Power: 48V DC Connectivity: Default: 1 x Copper 1000BaseT & 1 x SFP Synchronization Integral GPS receiver (GPS GLONASS BeiDou), Extra PPS Port, Optional: External GPS, 1588v2 CBRS: CBSD Type B SAS Support, Integrated Domain Proxy SAS Embedded EPC: Software Option Configuration: WebUI / CLI, Radio and Ethernet performance monitoring EMS Integration: SNMP v2c/v3 OAM Protocols: NetConf, HTTP(S), TCP/IP, UDP, (S)FTP, SSH, TR-069/TR-196 Gain: 17dBi Azimuth coverage (-5dB): 180° Azimuth Beam-width (-3dB): 45° Azimuth Beam-width (-5dB): 60° Elevation Beam-width (- 3dB): 10° Electrical Down-tilt: 0° Azimuth Side-lobe < -25dB (Typ.) Front-to-Back Ratio @180° > 30dB (Typ.) Co-Polar Port-to-Port Isolation 15dB (Typ.) Cross-Polarization Port-to- Port Isolation: > 20dB (Typ.) Max. VSWR: 1.5:1 Polarization: Dual Pol 45° Lightning Protection: DC Ground Dimensions (L x W x D): 350x570x227 mm (13.78”x 22.4”x 8.9”) Survival Wind Speed: > 200 km/hr Weight: 12.0 kg (26.45lb) Operational Temperature: -40°C to 60°C (-40°F to 140°F) Mechanical Up/Down Tilt: 0° to 5°,10° Product Includes:(1) BLiNQ Networks FW-300i Base Unit(1) Mounting Bracket(1) Mounting Assembly(8) Washers 1/4in(8) Socket Head Cap Screws 1/4in.-20, 5/8in.L(4) Washers 3/8in(4) Hex Nuts 3/8in. -16(1) User Manual