sE Electronics DM2 TNT Active Inline Preamp

EXPLOSIVE LEVEL FOR ALL YOUR PASSIVE MICS A new avenue of precision on stage and in the studio for your precious go-to dynamic & passive ribbon microphones! At the flick of a switch, the DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to find the sweet spot of your favorite passive mics. FEATURES Recommended for use with dynamic & passive ribbon microphones Switchable, clean and consistent gain from moderate +15dB to explosive +30dB Eight load settings ranging from 50 ohms to stunningly high 10 mega ohms to precisely match any mic Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity All-metal housing and premium finish ensures the DM2 can handle demanding on-tour or recording/broadcast studio lifestyles Gold plated XLR connector for loss-free reliable signal connection SPECIFICATIONS Power Electrical Impedance: 135 Ohms Recommended Load Impedance: >1K Ohms Connectivity: 3-pin male/female XLR connector Powering: 48V Phantom Power (P48 according to IEC 61938) Sound Frequency range: 10 Hz - 120 kHz (-0.3 dB) Gain: 15 dB / 30 dB Current consumption: 3.1 mA Max output level (0.5% THD): 9.5 dBV (3.0 V) Output noise level: 1 μV @ 15 dB / 6.6 μV @ 30 dB Dimensions Preamp diameter: 19 mm (0.75 in.) Preamp length: 96 mm (3.78 in.) Preamp weight: 80 g (2.82 oz.) What's in the box DM2 sE Logo Sticker User manual with warranty card