Sennheiser EW 112P Wireless Lavalier Microphone System For Video and Camera Use
Wireless omni-directional lavalier for performers, speakers and reporters. Providing the highest flexibility for outdoor shoots and field recordings. A broadcast quality sound solution. Providing the highest flexibility for your outdoor shoots and field recording applications. A robust wireless microphone system that offers excellent sound quality, simple mounting and ease of use. Rugged all-in-one wireless system with high flexibility for broadcast quality sound Excellent sound and construction quality Easy to use and fast setup time Powerful and reliable wireless transmission Range: up to 100 meters / 330 feet Up to 8 hours of operation time EW 112P G4-A (Assembled in USA) EK 100 G4 Frequency range Dimensions Approx. 82 x 64 x 24 mm Compander Sennheiser HDX THD, total harmonic distortion ≤ 0.9 % Weight (incl. batteries) approx. 160 g Audio output 3.5 mm jack socket: +12 dBu (mono, unbalanced) Signal-to-noise ratio ≥ 110 dBA Switching bandwidth up to 42 MHz Peak deviation ±48 kHz Nominal deviation ±24 kHz Operating time Typically 8 h Modulation Wideband FM Power supply 2 AA batteries, 1.5 V or BA 2015 accupack Current consumption at nominal voltage: typ. 180 mA with receiver switched off: ≤ 25 µA Adjacent channel rejection ≥ 65 dB Intermodulation attenuation ≥ 65 dB Powering 3 V battery / 2.4 V rechargeable battery Receiving frequency Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels RF sensitivity < 1.6 μV for 52 dBA eff S/N Squelch low: 5 dBµV middle: 15 dBµV high: 25 dBμV Temperature Range -10 °C to +55 °C Receiver Principle Adaptive diversity Blocking ≥ 70 dB SK 100 G4 Dimensions Approx. 82 x 64 x 24 mm Compander Sennheiser HDX THD, total harmonic distortion ≤ 0.9 % Weight (incl. batteries) approx. 160 g Signal-to-noise ratio ≥ 110 dBA RF output power Max. 30 mW Switching bandwidth up to 42 MHz Peak deviation ±48 kHz Nominal deviation ±24 kHz Operating time Typically 8 h Modulation Wideband FM Power supply 2 AA batteries, 1.5 V or BA 2015 accupack Current consumption at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 µA Input impedance 40 kΩ, unbalanced / 1 MΩ Max. Input voltage 3 Veff Powering 3 V battery / 2.4 V rechargeable battery Transmission frequency Max. 1680 transmitting frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Temperature Range -10 °C to +55 °C Frequency stability ≤ ±15 ppm ME 2 Connector 3.5 mm jack Frequency response 50 to 18,000 Hz (ME 2-II) Max. sound pressure level 130 dB Cable length approx. 1.60 m Transducer principle pre-polarized condensor microphone Pick-up pattern omni-directional Sensitivity in free field, no load (1kHz) 20 mV/Pa Equivalent noise level 36 dB What's in the Box EK 100 G4 camera receiver SK 100 G4 bodypack transmitter ME 2 clip-on microphone (ew 112 P variants only) 4 AA batteries CA 2 camera adapter CL 1 3.5 mm jack cable CL 100 XLR to 3.5 mm jack adapter cable quick guide safety guide manufacturer declaration sheet