8E1 TDM over IP | 8 E1 over IP Mux

Overview: As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-8E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing Ethernet or IP network. BD-8E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of eight E1 and two local Ethernet ports over Ethernet or IP network. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port. The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use BD-8E1-IP to provide legacy TDM services over wired or wireless packet network. Features User-friendly Web server supported for easy setup and maintenance SupportIETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP Point to point and point to multipoint application Eight E1 Ports supported Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 local data ports or monitoring ports, optical port can be used for uplink or local data. Stable E1 clock recovery, low jitter and wander Low processing delay for E1 channels, high bandwidth usage efficiency Resist to packet loss, with PCM frame synchronization protection User definable encapsulation packet size for different application Support VLAN settings for E1 service and in band VLAN management. E1 clock supports 3 mode: local clock, adaptive and loopback Enough jitter buffer to resist packet delay variation (PDV) Local Ethernet port throughput limiting, assuring E1 QoS Local and remote E1 LOS and AIS and packet loss indication for trouble-shooting and maintenance Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based). 16.Ethernet supportIEEE 802.3x, RSTP (1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning Ethernet packet size up to 9720byte Support POE (maximum power: 60W) (optional); Technical Specifications Item Description Model BD-8E1-IP 2 Uplink (1+1), 8E1s, 2 User Data Ports Interfaces Uplink 2 Uplink Ports Comply with IEEE 802.3 Speed and duplex auto-negotiation or forced E1 Port 8 E1 Ports Supported Comply with G.703 Impedance: E1-120Ω or 75Ω User Data Port 2 User Data Ports Supported Comply with IEEE 802.3 Speed and duplex auto-negotiation or forced Web Manager Supported Power Supply Pluggable dual power supply 2DC or 2AC or DC+AC -48V DC or 100～240V AC Consumption ≤10W Working Environment Temperature 0~ 50°C Relative Humidity ≤90% (non-condensing) Dimension W x H x D (mm): 440 x 44 x 231 Typical Application Point to Point Application   Point to Multipoint Application E1/4E1/8E1 TDM over IP work with 16E1 TDM over IP . Application story: BAUDCOM TDM over IP Work with GPON System SuccessfullyRelated Link:What is the difference between TDM over IP and E1 to Ethernet converter ? How to make voie over ethernet transmission? How to extend phone lines?